







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Roofing for San Francisco Homeowners
San Francisco roofs don’t fail the way roofs fail in the rest of California. The fog belt pushes moisture against north-facing slopes for weeks at a time, the salt air off the Pacific eats fasteners and flashing, and the older stock – Victorians in the Mission, Edwardians in Noe Valley, stucco bungalows in the Sunset – was often built with layer-upon-layer roof assemblies no one has fully mapped. When you call Rowan Construction Group, the conversation starts with a documented inspection, a written flat price, and a photo record of what we found. Our technicians have up to 19 years of experience, calls are answered by a live person 24/7, and every crew is background-checked and uniformed before they arrive at your door. Call (844) 797-6388.
What Our Roofing Service Includes

Roofing is one of seven trades we run under The Haven Standard, and it’s the one where the difference between a written scope and a verbal promise shows up fastest. Here’s what each part of the service covers.
Roof Repair
Roof repair addresses isolated failures on an otherwise sound roof – a lifted shingle course after a wind event, a cracked pipe boot, a failed valley flashing that lets water track into the sheathing. You need it when you’re seeing a ceiling stain, a persistent drip in the same spot, or granules collecting in your gutters. We open the area, photograph the substrate and deck condition, and write the repair flat before anyone touches a nail gun.
Roof Replacement & Installation
Full replacement means stripping to the deck, inspecting and replacing any soft sheathing, and installing a new underlayment and finish system to manufacturer spec. You need it when the roof has reached the end of its service life, when there are two or more existing layers, or when repeated repairs cost more than a new assembly. We write the replacement with a line-item scope – tear-off, decking, underlayment, finish, ventilation, flashings – and no work moves forward on a change until the change order is signed.
Metal Roofing
Metal roofing is a long-service-life assembly, most often standing seam or exposed-fastener panels, and it’s a strong fit for the wind exposure on hillside homes in Bernal Heights and Twin Peaks. You consider it when you want a roof you won’t revisit for decades, or when you’re already replacing and the budget allows the upgrade. We spec the panel system, the clip or fastener pattern, and the flashing details, and we name the manufacturer before the quote goes out.
Tile Roofing
Tile roofing – barrel tile, clay, or concrete – is common on Spanish Colonial and Mediterranean homes and holds up well to sun but fails at the underlayment and at broken tile. You need tile work when you’re seeing cracked or slipped tiles, or when water is getting past a tile field whose membrane has aged out underneath. We handle barrel tile roofing and tile repair as its own scope, because lifting and resetting tile without breaking it is a different skill than shingling.
Specialty Roofing
Specialty roofing covers the low-slope and flat sections, the transitions, and the odd corners – the tar-and-gravel sections over a rear addition, the modified bitumen over a garage, the parapet details on a building. You need it when a standard shingle approach won’t work on a given section. We treat these areas as separate assemblies with their own membrane and drainage detail, not as an afterthought patched into the main roof.
Gutters & Accessories
Gutters and accessories are where the roof actually drains, and in San Francisco they matter as much as the finish. You need gutter work when you’re seeing overflow at the fascia, staining on the stucco, or water sheeting against the foundation. We size and hang the gutter, set the downspout discharge, and add the accessories – ridge vent, drip edge, kick-out flashing – that keep water moving away from the structure.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Roofing
GAF and Owens Corning are the two shingle systems we’re called on most often, and each has its own profile. GAF’s Timberline line is a laminated asphalt shingle with a defined warranty tier structure, and we know where those installations fail when the ventilation is undersized or the starter course is skipped. Owens Corning’s Duration line uses a nail-strip reinforcement that we watch closely at the hip and ridge, where heat cycling does the most work. We read the manufacturer’s installation spec for the specific product on your roof, not a generic method.
The same discipline applies to the rest of the assembly. James Hardie fiber-cement products show up on fascia and siding transitions where a roof meets the wall, and we know where those joints need backer and sealant to stay watertight through a fog season. Whether your roof carries GAF, Owens Corning, James Hardie trim and fascia, or any other make, we can scope the work, name the product, and quote it flat. If you’re weighing a roof replacement against other envelope work, our home services overview lays out the trades we run side by side.
Signs You Need Roofing Right Now
- Water staining on a ceiling or wall. A brown ring or a spreading shadow on the interior surface usually means water is already past the finish and into the sheathing. The location of the stain tells us which roof plane to inspect, and the photo record shows exactly where the entry point is.
- Granules in the gutter or at the downspout base. Asphalt shingles shed granules as they age, and a heavy accumulation means the mat is breaking down. That’s not a cleaning problem; it’s a signal the finish layer is near the end of its life.
- Missing, lifted, or curling shingles after wind. San Francisco wind events lift courses at the ridge and at the rake edges first. A lifted shingle is an open door for the next rain, and it’s usually a repair rather than a replacement if we get to it early.
- Daylight or dampness in the attic. If you can see light through the roof deck from inside, there’s a gap that shouldn’t be there. Condensation on the underside of the sheathing is a separate signal – it often points to ventilation problems, which we evaluate as part of the scope.
- Sagging roofline or a soft spot underfoot. A visible dip in the roof plane usually means sheathing has absorbed water and lost structure, or a rafter has been compromised. This is the one sign that should prompt a call rather than a wait-and-see.
Our Roofing Process – Step by Step
- 1
Written inspection with photos. We walk the roof where it’s safe to do so, and where it isn’t, we inspect from the attic and from ground with documentation. We describe what we find in plain terms – the shingle layer count, the substrate condition, the flashing detail – and photograph it. You get the record whether you hire us or not.
- 2
Flat written price and scope. Every project is quoted with a flat written price and a written scope before work begins. Under Clause 1 of the Haven Standard, the price is written before anyone starts. You can screenshot it, compare it, and bring a competitor’s estimate for a free second opinion – we’ll review it line by line at no charge.
- 3
Signed change order for anything that changes. If we open the roof and find soft decking, rotted fascia, or a flashing detail that wasn’t visible from the outside, we stop and write the change. No work proceeds on a change until the change order is signed. That discipline is why our projects finish within a few percent of the number you agreed to.
- 4
Installation to the manufacturer’s spec. Tear-off, decking repair, underlayment, finish, ventilation, and flashings go in per the product spec, and we photograph each stage. Crews are background-checked and uniformed, and the photo record is part of the visit, not an add-on.
- 5
Final walkthrough and the 365-Day Done Right Promise. We walk the finished roof, hand over the photo record and the written warranty, and leave the site clean. If something isn’t done right, the 365-Day Done Right Promise means we make it right – backed by The Haven Standard and a terms page, not an asterisk.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Roofing Cost in San Francisco?

A typical roof repair in San Francisco runs $470 – $2,125 depending on access, the number of leak points, and whether the issue is a flashing detail or a section of failed shingle. A full roof replacement runs $9,440 – $23,600 for most single-family homes, driven by square footage, the number of existing layers to tear off, decking condition, and the finish system you choose. Tile roof repair sits at $710 – $2,950 because lifting and resetting barrel tile without breakage is slower work than patching asphalt, and metal roof installation runs $17,700 – $47,200 for a standing seam system, which is a long-service-life assembly and priced accordingly.
What moves the number: the count of tear-off layers (each additional layer adds labor and disposal), decking replacement if the sheathing has taken water, the pitch and access of the roof, and the finish you select. How to avoid overpaying: get a written line-item scope, not a single lump number, and compare the included ventilation and flashing details, because that’s where cheap quotes get thin. Every Rowan estimate is free, written, and line-itemized, with a written warranty attached. Call (844) 797-6388 for an exact quote.
Roofing Near San Francisco – Our Service Area
We work roofs across San Francisco and the surrounding cities – South San Francisco, Millbrae, and down the Peninsula, plus Emeryville, Berkeley, and Oakland across the bay. Our San Francisco service area page and the Berkeley service area page each lay out the neighborhoods and typical scheduling windows, so you know when a crew can reach you. Response times depend on the job and the weather, but calls are answered by a live person 24/7.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Roofing in San Francisco

Roofing is the assembly that keeps water out of a building – the deck, the underlayment, the finish (shingles, tile, or metal), the flashings, and the drainage. A roofing contractor inspects and documents the condition of that assembly, writes a scope of work, and installs or repairs it to the manufacturer’s spec. At Rowan, the contractor also delivers a written flat price before any work starts and a photo record on every visit. Call (844) 797-6388 to schedule a free inspection.
Most single-family roof replacements take two to five working days, depending on the size, the number of layers to tear off, and the weather. A tear-off to bare decking with new underlayment and finish runs longer than a repair, and a tile or metal system runs longer than asphalt. We set the schedule in the written scope so you know the window before the crew arrives. Call (844) 797-6388 for a project-specific timeline.
Roof repair runs $470 – $2,125, and roof replacement runs $9,440 – $23,600 for most homes, with tile repair at $710 – $2,950 and metal installation at $17,700 – $47,200. The range depends on square footage, tear-off layers, decking condition, and finish. Every estimate is free, written, and line-itemized. Call (844) 797-6388 for an exact quote.
Yes – GAF and Owens Corning are the two shingle systems we work with most often. We read the manufacturer’s install spec for your specific product and know where each line tends to fail when ventilation or flashing detail is skipped. We also handle James Hardie fascia and trim at roof-to-wall transitions. Call (844) 797-6388 and we’ll confirm what your roof carries.
Yes – calls are answered by a live person 24/7, and we handle emergency and storm damage as its own scope. A tarp-and-stabilize visit protects the interior first, then we document the damage and write the repair. If wind has lifted shingles or a storm has opened a flashing detail, call (844) 797-6388 and we’ll get a crew moving.
Every roof comes with a written warranty plus the 365-Day Done Right Promise – if it isn’t done right, we make it right. That promise is printed on every page and backed by The Haven Standard terms, not an asterisk. The manufacturer’s product warranty applies on top of that. Call (844) 797-6388 to see the warranty language before you commit.
Clear the driveway and the area below the work zone, move or cover anything fragile in the attic, and secure pets and children away from the tear-off zone. We’ll confirm the schedule and the staging plan in advance, and the crew will protect landscaping and walk the site clean at the end. The photo record documents the before-and-after. Call (844) 797-6388 with any prep questions before the crew arrives.
Schedule Your Roofing Service in San Francisco Today
If you’re seeing a stain, a lifted shingle, or a roofline that’s starting to sag, the next step is a free written estimate – not a sales call. Call Rowan Construction Group at (844) 797-6388, and a live person will schedule your inspection. You’ll get a flat written price, a documented photo record, and the 365-Day Done Right Promise. No obligation, and no work starts until you sign.
Written by the team at Rowan Construction Group.












