







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in San Francisco, CA
Vanities, tile, and fixtures are the three surfaces a bathroom is judged by, and they carry most of a remodel’s visible budget. In San Francisco, a mid-range vanity replacement with a quartz or stone top and new Kohler or Toto fixtures typically runs $3,800 to $8,500, while full floor-and-wall tile work adds $4,500 to $14,000 depending on the substrate and layout. We quote a flat written price for each scope before anyone touches a tool, and every visit ends with a photo record of what we found behind the old vanity and under the old tile.
Rowan Construction Group San Francisco handles this work as part of our Bathroom Remodeling trade, and it’s also the trade where the most expensive surprises hide. A Victorian in the Mission or an Edwardian in Noe Valley rarely has a level subfloor under the tile, and a 1920s bath often has galvanized supply lines the vanity was concealing. We price those conditions when we find them, in writing, with a signed change order before the work continues. Call (844) 797-6388 for a free estimate and a written scope for your vanity, tile, or fixture project.
What this scope covers
- Vanities: freestanding, floating, and custom built-ins from KraftMaid and Wellborn cabinetry lines, with tops in Cambria quartz, Caesarstone, or natural stone.
- Tile: floor and wall tile, shower surrounds, wainscot, and mud-set or backer-board installations with the waterproofing membrane specified and documented.
- Fixtures: toilets, faucets, shower valves, tub fillers, and lighting trim from Kohler and Toto lines, selected and confirmed before demolition day.

When You Need Vanities, Tile & Fixtures
These are the conditions we see most often in San Francisco bathrooms. If two or more apply to your room, the vanity and tile scope is the right place to start.
- Your vanity top is cracked, delaminating, or laminate from a 1990s flip. Many of the homes sold between 2015 and 2022 in Bernal Heights and Potrero Hill got cosmetic bathroom refreshes with builder-grade tops. The substrate underneath is often worse than the top.
- Grout lines are failing, or tile is popping or hollow-sounding. A hollow tile in a shower surround almost always means the waterproofing failed. That’s a membrane problem, not a cosmetic one, and re-grouting won’t fix it.
- The vanity is the wrong size for the room. A 30-inch vanity in a bathroom that could take a 48-inch double, or the reverse in a small Inner Sunset pied-à-terre, changes how the whole room works.
- You’re keeping the toilet and tub but everything else is dated. A vanity, tile, and fixture-only scope is a common request when the plumbing rough-in is sound and the budget belongs on the visible surfaces.
- You want to go from a tub-and-shower combo to a walk-in shower. That changes the tile footprint, the valve, and the drain, and it’s a fixture and tile job more than a plumbing one.
- A pre-sale refresh is due. If you’re listing in San Francisco, a new vanity top, refinished tile, and modern fixtures read as a remodeled bath on the disclosure packet without moving any drains.
Our Vanities, Tile & Fixtures Process
- Walk the room and photograph the conditions. We photograph the existing vanity, the shutoff valves, the subfloor visible at the toe kick, and the shower wall. That photo record comes with the estimate, so you can see what we’re pricing against.
- Write the scope and the price. You get a flat written price with a written scope and a written warranty. Under Clause 1 of the Haven Standard, no work starts until the number is in writing. If you have a competitor’s quote, we’ll review it line by line at no charge.
- Select materials and confirm the specs. We work from KraftMaid, Wellborn, Cambria, and Caesarstone lines for the vanity and top, and specify the waterproofing membrane for the tile by name. Fixture selection from Kohler and Toto happens before demolition so there are no delay gaps.
- Demo, protect, and inspect the substrate. We pull the vanity, remove the old tile, and inspect the subfloor and wall conditions. If the substrate is compromised (rotten plywood, a failed membrane, a rusted supply line), we document it and write a change order before proceeding. No work proceeds on a change until you sign it.
- Install tile and set the vanity and fixtures. Membrane and tile go in first, then the vanity is set and shimmed level, then the fixtures and top. Every step is photographed for the record.
- Final walkthrough with documentation. We hand you the photo record of the whole installation and the written warranty terms. If anything is not right in the first 365 days, we make it right under the 365-Day Done Right Promise.

Vanities, Tile & Fixtures Pricing in San Francisco
These are honest ranges for a standard-size San Francisco bathroom in 2026. Your number depends on the scope, so we write a flat price after the walkthrough rather than quoting from a phone photo. Our technicians have up to 19 years of experience, and every project runs from a written scope, not a verbal estimate.
Vanity costs
| Scope | Typical range |
|---|---|
| Stock vanity, 24 – 36 inch, with quartz top | $1,200 – $2,400 |
| Semi-custom vanity from a KraftMaid or Wellborn line | $2,400 – $4,800 |
| Custom built-in with a Cambria or Caesarstone top | $4,500 – $9,500 |
Tile costs
| Scope | Typical range |
|---|---|
| Floor tile only (standard 5×7 bath) | $1,800 – $4,200 |
| Floor plus shower surround with new membrane | $4,500 – $9,500 |
| Full wall tile and floor tile, higher-end stone | $8,000 – $14,000 |
Fixture costs
| Scope | Typical range |
|---|---|
| Toilet replacement (Kohler, Toto), installed | $450 – $900 |
| Faucet and shower valve replacement | $350 – $800 |
| Full fixture package (toilet, faucet, valve, trim) | $1,400 – $2,800 |
What moves the price: a compromised substrate is the biggest variable in San Francisco. A 1920s bath with mud-set tile means demo labor and a new backer-board system; a 1960s bath with a failed cement board has different costs. Irregular layouts, a move of the drain or supply, and stone versus ceramic tile all shift the number. A written scope fixes what’s included before demo begins.
Free second opinion on any written estimate. Bring a competitor’s quote and we’ll review it line by line at no charge. Call (844) 797-6388 for a written estimate for your San Francisco bathroom.
FAQs – Vanities, Tile & Fixtures
How much does a vanity replacement cost in San Francisco?
A vanity replacement in San Francisco typically costs $1,200 to $9,500 including the cabinet and top, depending on whether you choose a stock unit or a custom built-in. Stock units top out around $2,400, while semi-custom from KraftMaid or Wellborn runs $2,400 to $4,800 and custom with a Cambria or Caesarstone top lands in the $4,500 to $9,500 range. Call (844) 797-6388 for an exact written quote; estimates are free.
Do you have to redo the whole bathroom to replace tile?
No. Tile replacement can be scoped to a floor only, a shower surround only, or both, and you keep the toilet and tub in place if the plumbing rough-in is sound. A floor tile retrofit runs $1,800 to $4,200, and a floor-plus-shower scope is $4,500 to $9,500. If the membrane is failing, the scope grows to include waterproofing, which is the only correct fix. Call (844) 797-6388 and we’ll tell you which scope your bathroom actually needs after the walkthrough.
Can you finish a vanity and tile project in a week?
A vanity-only or fixture-only scope is often a 2- to 3-day job in San Francisco, while a full tile scope with new membrane and a vanity runs closer to 7 to 10 working days. Delays come from surprise conditions behind the drywall, water damage, or a rusted shutoff, and those are documented before we write a change order. If the rough-in is clean and materials are on hand, timelines hold. Call (844) 797-6388 for a scheduling window that fits the number we write.
Is it cheaper to reface a vanity or replace it?
Refacing is cheaper when the existing cabinet box is solid and square, often 40 to 60 percent less than a full replacement. But if the box is warped, water-damaged at the toe kick, or the wrong size for the room, replacing it is the better spend because the new vanity is guaranteed under our 365-Day Done Right Promise. We’ll tell you which one applies after we pull the drawers and photograph the interior. Call (844) 797-6388 and we’ll give you the written price both ways.
Working With Us
Our crews are background-checked and uniformed, and a live person answers calls 24/7. Every visit ends with a documented photo record, included as a standard deliverable. The written price, the signed change order, and the written warranty apply the same way whether your project is a vanity swap in the Richmond District or a full bath remodel in Pacific Heights. If you’re also considering a broader scope for the room, see our home page and the bathroom remodeling in San Francisco overview. Tile substrates matter as much here as they do on exterior work, and our roofing and paving teams follow the same inspection-first process. If your project expands to full-unit scope, our ADU work follows the same written-price discipline.
We’re a construction contractor, not a showroom, and we don’t pretend to be one. What we do is put the number in writing before anyone picks up a tool, and document every visit so you have evidence of what was found and what was done. That’s the whole promise: written price, signed change orders, photos on every visit. Call (844) 797-6388 today for a free estimate, and we’ll walk your bathroom with you and write the number that holds.
Written by the team at Rowan Construction Group San Francisco, serving San Francisco.


