







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterImpact Window Costs in San Francisco: What You’re Actually Paying For
Impact-rated windows in San Francisco typically run $1,100-$1,900 per window installed for a standard double-hung or casement with a laminated-glass IGU (STC 38-42), and $1,600-$2,800 per window when the unit has to match an original Victorian or Edwardian divided-light profile. A full bay window assembly runs $6,500-$14,000. Call (844) 797-6388 for a written price on your specific openings before anything is ordered. The number depends less on the glass than on what the Planning Department will let you put in the hole.
Here’s the part most quotes miss. In San Francisco, impact glass is rarely specified for wind. It’s specified because a laminated-glass insulated glass unit is the one product that solves three problems at once: the acoustic problem of living a dozen feet from a Muni surface line, the condensation problem eating the sill plate on a north-facing bay, and the design-review requirement that the new window match what came out.

Why laminated glass, not hurricane glass, is the San Francisco spec
A standard double-pane window lands around STC 28-32. A laminated-glass IGU reaches STC 38-45. On a flat above the N-Judah or the J-Church, that gap is not abstract. It’s the difference between hearing the 6:40 a.m. train from your bedroom and not. Laminated glass uses a polyvinyl butyral interlayer that damps sound across the frequencies surface rail produces, which is why it outperforms thicker airspace alone. That’s the acoustic case, and it’s the primary reason San Francisco homeowners ask us for impact-rated units.
The same interlayer holds the glass together on impact, which is where the “impact” rating comes from. It’s a genuine safety benefit. It’s just not why anyone on a 25-foot lot in the Sunset is buying it.
What moves the price per window
The installed cost of an impact unit in San Francisco is a stack of variables, and each one you add pushes the number up. Frame material and the character match are the two biggest.
- Glass make-up. Laminated IGU with a warm-edge spacer sits at the low end of the range; laminated plus low-E plus argon adds cost but cuts heat loss.
- Frame material. Vinyl is cheapest. Aluminum-clad wood or fiberglass typically adds $300-$700 per window, and on a visible Victorian facade it’s often the only option Planning will approve.
- Character match. Replicating a divided-light pattern, true muntins, and the original exterior profile is what separates a $1,100 window from a $2,800 one.
- Access. On the steep blocks of Russian Hill, Potrero Hill, and Noe Valley, a delivery truck often can’t reach the door. Crews hand-carry units up stairs, which is labor you’re paying for.
- Opening condition. Rotted sill plates and balloon-frame framing around an old opening need repair before a new unit goes in. We document the substrate condition in photos so you see what we found.

Impact window pricing in San Francisco
These are installed ranges, materials and labor included. Your written quote will name the manufacturer and series so there’s no ambiguity about what’s being installed. Every Rowan job gets a flat written price and written scope before work starts, per Clause 1 of The Haven Standard.
| Scope | Installed range |
|---|---|
| Standard double-hung or casement, laminated IGU (STC 38-42) | $1,100-$1,900 per window |
| Divided-light profile matched to Victorian/Edwardian character | $1,600-$2,800 per window |
| Full bay window assembly replacement | $6,500-$14,000 |
| Aluminum-clad wood or fiberglass premium over vinyl (Planning compliance) | +$300-$700 per window |
| Impact window installation, whole-project range | $9,440-$29,500 |
For comparison, a non-laminated Windows & Doors replacement generally runs $5,310-$17,700 on a whole-project basis. The delta is the laminated interlayer, the character match, and the paperwork.
The Planning Department constraint nobody quotes for
Replacing windows on the visible facade of a Victorian in an RH-1 or RH-2 zone requires the new window to match the original divided-light pattern and exterior material profile. That’s design review, and it’s separate from the building permit. A vinyl replacement window that meets the impact rating may still fail Planning, which means a redesign after you’ve already submitted. The fix is choosing aluminum-clad wood or fiberglass up front, at that $300-$700 per-window premium. Our written quote includes the compatibility check before any window is ordered, so the product specified is one that will clear review, not one that gets bounced back.
Fog-belt condensation is destroying wood framing right now
Original single-pane wood sash in the Sunset, the Richmond, and West Portal generates interior condensation that runs down into the sill and rots the sill plate. It’s fog-driven, and it’s relentless because San Francisco has almost no true summer heat to dry things out. A laminated IGU with a warm-edge spacer reduces the interior glass surface temperature swing by 12-18°F, which ends the condensation cycle. That’s the quiet financial case for impact glass here: you’re not just buying quiet, you’re stopping the rot that’s been quietly eating the framing around every north- and west-facing opening.
We use American Standard and Toto fixtures on the interior side of these projects when a window replacement turns into a bathroom or kitchen scope, and Schluter waterproofing systems when we’re opening walls. Naming brands keeps the quote honest rather than padded.
What’s included with every Rowan window project
Crews are background-checked and uniformed, and a live person answers the phone 24/7. Every visit includes a documented photo record as a standard deliverable. If something isn’t done right, our 365-Day Done Right Promise covers it. We’ll also review any competitor’s written estimate line by line at no charge as a free second opinion.
This is the same discipline we bring across all seven trades, from San Francisco kitchen remodels to ADU construction. Technicians on our crews have up to 19 years of experience, which matters most on old lath-and-plaster and balloon-frame walls where the opening was never square to begin with.
FAQs
Expect $1,100-$1,900 per window for a standard laminated-glass unit, $1,600-$2,800 per window when the divided-light profile has to match a Victorian or Edwardian facade, and $6,500-$14,000 for a full bay assembly. Call (844) 797-6388 for an exact written quote; estimates are free.
Yes, measurably. Laminated glass reaches STC 38-45 versus STC 28-32 for standard double-pane, and on a flat near the N-Judah or J-Church that difference is audible. Call (844) 797-6388 to talk through which STC rating fits your street.
Often not, on the visible facade of a Victorian in RH-1 or RH-2. Planning requires the new window to match the original divided-light pattern and exterior material, so aluminum-clad wood or fiberglass is frequently the compliant choice. That adds $300-$700 per window. Call (844) 797-6388 and we’ll check compatibility before you order.
Yes, in most cases. We deliver a flat written price with a written scope before any work starts, on every trade. Call (844) 797-6388 and we’ll schedule a visit and confirm timing for your address.
Ready to put a number on paper? Call Rowan Construction Group San Francisco at (844) 797-6388 for a free estimate and a written price on your impact window project, with the Planning Code compatibility check included before a single unit is ordered.
Written by the team at Rowan Construction Group San Francisco, serving San Francisco, CA.
What Our Customers Say
"Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O.












