







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Refacing Costs in San Francisco, and Why It Runs Higher Here
Cabinet refacing in San Francisco typically runs $175-$275 per linear foot, with most kitchen jobs landing between $16,520 and $53,100 once door skins, veneer, hardware and drawer fronts are totaled. That’s well above the $80-$130 per linear foot quoted on national cost guides, and the gap isn’t labor rates alone. In pre-1906 Victorian and Edwardian kitchens, the original boxes are frequently non-standard: shallower, narrower, or angled around a bay window, which means custom-cut veneer and new door sizing before a written price can even be set. Call (844) 797-6388 and we’ll put that number in writing before any demo starts.
Key Takeaways
- Most San Francisco cabinet refacing lands in the $16,520-$53,100 range, or roughly $175-$275 per linear foot.
- Victorian boxes often can’t take a standard refacing kit; original 5/8-inch plywood or solid fir needs a surface-prep step most guides skip.
- Bay-window corner cabinets add $200-$400 per unit for miter-cut door fronts, and that has to appear on the change order before work begins.
- If more than 30% of boxes need structural repair, we show refacing and full replacement side by side in the same written quote.

Why Victorian Box Dimensions Change the Price
Most refacing cost guides assume a modern 12-inch-deep upper cabinet built from particleboard. San Francisco’s older housing stock, the 1880s-1920s wood-frame rows that make up so much of the city, was framed by builders who worked to their own dimensions. Uppers in these kitchens frequently sit at 30-inch depth or run narrower than today’s standard, and the original boxes are 5/8-inch plywood or solid fir rather than particleboard.
That matters because adhesive veneer takes differently to fir than to modern composite board. A fir face needs sanding and a bonding primer before the veneer goes down; skip that surface-prep step and you get bubbling in the first humid season. We build the prep into the written scope so it isn’t a surprise line item later. This is the same discipline we apply across Kitchen Remodeling, where the box itself dictates what the finish can and can’t do.
What Actually Shows Up in a Written Refacing Quote
A real refacing number breaks apart line by line. Veneer is priced per square foot of face area, not per door, because the face area is what drives material cost. Door skins are quoted as new fronts sized to your specific box openings, and we source them from KraftMaid or Wellborn so the finish matches across the run. Hinge hardware and drawer-front replacement sit on their own lines. If you want to see how refacing compares to a from-scratch build, our home page lays out the seven trades we cover.
A representative breakdown looks roughly like this:
- Veneer material: priced per square foot of face area, so an L-shaped Victorian kitchen costs more than a galley of the same door count.
- Door skins: KraftMaid or Wellborn fronts cut to non-standard openings, priced per door.
- Hinge hardware: new concealed hinges as a separate line, never folded into the skin price.
- Drawer fronts: replacement fronts matched to the new door finish.
- Surface prep: sanding and bonding primer on original fir or 5/8-inch plywood boxes.

San Francisco Cabinet Refacing Price Ranges
These are the ranges we work from in San Francisco, measured against comparable kitchen work in the same housing stock. Every quote we write is a flat price with a written scope and a written warranty, delivered before anyone picks up a tool.
| Line item | Low | High |
|---|---|---|
| Cabinet refacing (full kitchen) | $16,520 | $53,100 |
| Cabinet installation (full replacement) | $4,720 | $15,340 |
| Countertop installation | $2,360 | $7,670 |
| Backsplash installation | $945 | $2,950 |
| Kitchen island installation | $3,540 | $11,800 |
| Small kitchen remodel (for comparison) | $10,620 | $23,600 |
If you’re weighing refacing against a broader remodel, our Kitchen Remodeling in San Francisco page covers the full scope. Countertop and backsplash work often travel with a refacing job because the new door finish changes what the counter reads against, and those ranges above are what we quote for each.
The Bay-Window Problem in San Francisco Row Houses
Angled corner cabinets framing a bay window are everywhere in San Francisco row houses, and they’re the single most underestimated cost in a refacing quote. A square box takes a square door front. A bay-frame corner box is set at an angle, which means the door front has to be miter-cut to sit flush, and that fabrication adds $200-$400 per unit.
The reason this matters is documentation. On a job where the bay cabinet isn’t caught in the initial walk-through, that cost surfaces mid-project as an argument. Under our change-order discipline, no work proceeds on a change until the change order is signed, so the miter-cut cost is written and agreed before the saw comes out. You’ll never learn about a $400 surprise after the veneer is already on.
Fog-belt moisture is the other local factor. North- and west-facing walls in San Francisco hold condensation through the year, and kitchens with fog-driven moisture damage on those walls are exactly where box condition needs a hard look before refacing is quoted.
Reface or Replace? Where the Crossover Sits
Refacing wins when the boxes are sound. It narrows fast when they aren’t. Once more than 30% of boxes need structural repair, common in kitchens with fog-belt moisture damage on north- and west-facing walls, the cost advantage of refacing shrinks toward the cost of new boxes. When we hit that threshold, we show both options side by side in the same written quote. One number for refacing, one for replacement, both with a written scope. That way you’re comparing real figures instead of guessing.
Replacement cabinet installation in San Francisco runs $4,720-$15,340, so if a substantial share of your boxes is compromised, the math can flip. We’d rather you see the crossover than have us defend a refacing price that doesn’t hold.
What the 365-Day Done Right Promise Covers Here
Veneer delamination is a real risk in a high-humidity San Francisco microclimate, particularly on walls that face the fog. It’s a covered defect under the 365-Day Done Right Promise, printed on every page and backed by a terms page, not an asterisk. If the veneer lifts within the first year, we make it right.
Every visit also includes a documented photo record as a standard deliverable, so you leave with evidence of what we found inside the boxes and what we did about it. Our technicians have up to 19 years of experience, they’re background-checked and uniformed, and a live person answers our line 24/7. If you’ve got a competitor’s estimate, our Free Second Opinion reviews it line by line at no charge.
FAQs
Most San Francisco refacing jobs run $16,520-$53,100, or about $175-$275 per linear foot, with bay-window units adding $200-$400 each. The range runs higher than national guides because Victorian box dimensions are non-standard. Call (844) 797-6388 for an exact written quote, free of charge.
San Francisco refacing costs more because pre-1906 Victorian kitchens have non-standard box dimensions, often shallower, narrower, or angled around a bay window, which requires custom-cut veneer and new door sizing. Fir and 5/8-inch plywood boxes also need surface prep that modern particleboard doesn’t. Call (844) 797-6388 to get a flat price for your specific boxes.
Refacing is almost always cheaper, until more than 30% of boxes need structural repair, and then the gap narrows. In that case we quote both side by side so you can compare. Call (844) 797-6388 and we’ll walk your boxes and tell you which path the numbers favor.
Yes. Veneer delamination within the first year is covered under the 365-Day Done Right Promise, and we treat it as a covered defect rather than a warranty argument. Fog-driven moisture is the usual cause. Call (844) 797-6388 and we’ll come look at it.
Get Your Refacing Number in Writing
Rowan Construction Group San Francisco prices refacing the way we price everything: a flat written number with a written scope and a written warranty, before any work starts. If your kitchen has bay-frame cabinets or fir boxes, that number accounts for both. Call (844) 797-6388 for a free estimate and a second opinion on any quote you’re holding.
Written by the team at Rowan Construction Group San Francisco, serving San Francisco, CA.
What Our Customers Say
"Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O.












