







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose GAF Construction
Rowan Construction Group San Francisco provides independent GAF roofing service in San Francisco: repair, replacement, and installation of GAF shingle systems, including Timberline HDZ, Timberline UHDZ, and GAF Liberty low-slope roll roofing. We’re an independent GAF service provider, not a GAF dealer or authorized contractor, and that independence is deliberate. We read the same published installation specs a GAF warranty inspector reads, then build a roof assembly that survives fog, salt air, and wind. On a 25-foot-wide lot in Noe Valley or a hill cut in Potrero Hill, that distinction decides whether the roof lasts 12 years or 30. Call (844) 797-6388 for a free written estimate.
Why Trust Rowan Construction Group San Francisco for Your GAF Construction?

GAF makes four systems we work on regularly, and each behaves differently under San Francisco conditions. Timberline HDZ is the architectural shingle we see most. Timberline UHDZ is the premium layer, heavier and warrantied differently. Timberline AS II is the old three-tab still sitting on 1970s and 1980s roofs. GAF Liberty is the self-adhered roll roofing on low-pitch additions and converted garages, common where a Sunset or Richmond rear extension has almost no slope.
Our technicians have up to 19 years of experience, and that experience is where GAF knowledge lives or dies. We know the nailing window on HDZ shingles by heart, we know what a high nail looks like from a ladder, and we know which GAF underlayments and ice-and-water shield detailing the assembly requires at valleys and step flashing. We use GAF shingles and accessories that match the published assembly. Where a quality aftermarket underlayment meets or exceeds GAF’s spec, we explain the trade-off before the crew arrives, so you can decide with a written comparison, not a shrug.
Rowan operates under The Haven Standard. Clause 1 is simple: the price is written before anyone starts. That holds on a $470 flashing repair and on a full replacement. You get a written scope, a flat price, and a 365-Day Done Right Promise. If the work isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common GAF Construction Problems We Fix in San Francisco
San Francisco roof failures follow patterns. The fog, salt, and wind do their part, and installation shortcuts do the rest. These are the five we see most.
- Timberline HDZ sealant strips that never activated. On exposed ridges in areas like Russian Hill and the outer Sunset, wind-driven rain and coastal fog keep the shingles cool enough that the factory sealant strip doesn’t thermally seal. The tabs lift, and under the next storm they blow off. This isn’t a wind problem alone; it’s a sealing-temperature problem the installer should plan around.
- Premature granule loss on south- and west-facing Timberline slopes. UV exposure plus salt-laden marine air accelerates surface erosion. When granules disappear in patches before the shingle is 15 years old, that’s a climate effect, not necessarily a defect. It changes the replacement timeline.
- Valley, step-flashing, and chimney-counterflashing leaks. The most common cause is an original install that skipped GAF’s required ice-and-water shield and underlayment detailing at these points. Water gets behind the shingle course and finds the ceiling a story below, long after the shingle surface looks fine.
- Nailing errors that void the wind rating. High nails, over-driven fasteners, and nails outside the fastening zone all show up on inspection. Any of them lets water track behind the shingle and reduces the assembly’s wind rating to nothing.
- GAF Liberty roll roofing lifting at seams on low-slope additions. Adhesion depends on a clean, dry, correctly primed deck. On a San Francisco addition where fog keeps the surface damp, a rushed install lifts at the lap within a season. The fix is deck prep and primer discipline, not more adhesive.
GAF Parts & Our Repair-vs-Replace Approach

Every GAF job starts with matching parts to the actual assembly, not to whatever a supply house happened to have. We specify genuine GAF shingles and accessories that match the published system, because a Timberline HDZ repair needs HDZ shingles of the correct color and profile, plus starter strip, ridge cap, and underlayment that meet the same spec. We don’t claim to stock GAF parts locally: parts are ordered to the job, and the written quote names them.
The repair-or-replace call is where we’re most careful. Isolated flashing, ridge, or wind damage on an otherwise sound roof is a targeted repair, and it’s usually a fraction of replacement cost. Once field shingles show widespread granule loss or the deck feels soft underfoot, replacement is the honest recommendation. We say which one, with the evidence, before you commit.
Call (844) 797-6388 for an exact quote. Estimates are free, and we’ll review any written estimate you already have, line by line, at no charge.
Our GAF Service Process – Step by Step
- 1
Diagnosis. We get on the roof, photograph the shingle type, fastening pattern, underlayment exposure at valleys and flashing, and any granule loss. You receive a documented photo record of what we found, as a standard deliverable on every visit.
- 2
Written scope and price. The quote names the GAF shingle line and color, the underlayment and ice-and-water shield detailing, the flashing work, and a flat price. No work starts before you have the number in writing.
- 3
Repair or install. Repairs nail to GAF’s required exposure and fastening zone, with matching shingles. Installations follow GAF’s published assembly sequence, deck to ridge. Any scope change waits for a signed change order; that discipline is why projects finish within a few percent of the agreed cost.
- 4
Verification and warranty. We walk the roof, confirm flashing and exposure, and hand you the written warranty and the photo record. Crews are background-checked and uniformed, and a live person answers calls 24/7.
A typical job: a homeowner sees shingle tabs lifting along a wind-exposed ridge after a winter storm, then a damp stain on the ceiling below. Usually the sealant strips never activated, or the nailing sat too high, so wind got under the course and water tracked past the underlayment. A qualified roofer checks the deck and flashing, replaces the damaged courses to GAF’s required exposure and nailing pattern, and verifies the whole assembly instead of patching the visible tabs.
See the difference
Before
After
Before
After
Before
AfterGAF Products We Service & Install in San Francisco
We service and install the GAF systems that fit San Francisco’s housing stock. Timberline HDZ covers the majority of residential replacement and repair work on pitched roofs. Timberline UHDZ is for homeowners who want the heavier, premium architectural line. Timberline AS II repairs keep older three-tab roofs going where replacement isn’t yet warranted. GAF Liberty self-adhered roll roofing handles the flat and low-slope additions, converted garages, and rear extensions that show up on nearly every block in the city. Starter strips, ridge cap, underlayments, and ice-and-water shield accessories come matched to the published assembly. Metal and tile roof systems are available through our other roofing lines when the house calls for something other than asphalt.
We Also Service These Brands
Rowan Construction Group San Francisco isn’t tied to one manufacturer. Alongside GAF, we install and service KraftMaid and Wellborn cabinets for kitchen and bath work, Kohler and Toto fixtures, PGT impact windows and doors, and Master Halco fences. Sourcing across fifty-plus vetted brands is what lets the written quote land on honest numbers, not inflated ones.
FAQs – GAF Construction Service in San Francisco

No. We’re an independent GAF service provider. We aren’t a GAF authorized contractor, dealer, or Master Elite installer, and we don’t claim manufacturer affiliation. What we do is build to GAF’s published installation requirements, which is what the manufacturer’s warranty terms actually reference. Call (844) 797-6388 to talk through your roof.
GAF’s material warranties cover the shingles themselves against manufacturing defects, and they follow the product, not the installer; installation quality is a separate matter. Many extended labor and enhanced warranty tiers are tied to GAF’s own certified installer network, so check your warranty documents. Regardless of tier, an install that misses GAF’s required nailing, exposure, and underlayment detailing can affect a claim. We build to spec and document the assembly. Call (844) 797-6388 if you want a written estimate.
South- and west-facing Timberline slopes in San Francisco lose granules faster than the same shingles inland. UV exposure combined with salt-laden marine air erodes the granule surface, and fog-driven condensation cycles add stress. Patchy granule loss before 15 years usually points to climate exposure or a defective batch. Widespread loss across the field means replacement is the honest call. Call (844) 797-6388 for an exact quote, free of charge.
Yes, when the damage is isolated to flashing, ridges, valleys, or a wind-damaged section and the surrounding field shingles are sound. A targeted repair using matching GAF shingles restores the roof at a fraction of replacement cost. Once the deck softens or granule loss spans the field, replacement is cheaper over a decade. Call (844) 797-6388 and we’ll tell you which, with photos.
Blow-off usually traces to sealant strips that never activated or nailing that sat outside GAF’s fastening zone. Coastal fog and wind-driven rain keep the shingles too cool to seal thermally, and high or over-driven nails let wind get under the course. In San Francisco, sealant has to be planned for, not assumed. Call (844) 797-6388 for a free estimate.
Yes, on genuinely low-slope additions, converted garages, and rear extensions where pitched shingles won’t work; GAF Liberty is a self-adhered low-slope system built for that application. Performance depends on deck preparation and primer discipline, which is where rushed installs fail. We specify it only where the slope calls for it. Call (844) 797-6388 to schedule a free estimate.
Work that follows GAF’s published installation and repair requirements shouldn’t void the material warranty, since that’s what the terms reference. Using mismatched shingles, skipping underlayment detailing, or nailing outside the fastening zone can affect a claim. We document each job and leave you a written warranty. Call (844) 797-6388 to discuss yours.
GAF roof work in San Francisco runs from a few hundred dollars for a targeted repair to low five figures for a full replacement, depending on roof size, pitch, and access. Here are our published ranges:
| Service | Price Range |
|---|---|
| Roof Repair | $470 – $2,125 |
| Roof Replacement | $9,440 – $23,600 |
| Metal Roof Installation | $17,700 – $47,200 |
| Tile Roof Repair | $710 – $2,950 |
Steep hills and narrow streets in places like Russian Hill, Potrero Hill, and Noe Valley can push a job toward the top of range when crews hand-carry materials because a truck or mixer can’t reach the door. Call (844) 797-6388 for an exact quote. Estimates are free, and we review any written estimate line by line at no charge.
A targeted repair typically takes a day. A full GAF shingle replacement on a narrow-lot San Francisco Victorian usually runs three to seven working days, longer if the deck needs repair or the roof sits on a steep hill lot that calls for grade beams and stepped foundation work. Schedule can be affected by permits and weather. Call (844) 797-6388 for a written timeline with your estimate.
Book Your GAF Service in San Francisco, CA
If your GAF roof needs a diagnosis, a repair, or a replacement built to GAF’s published assembly, bring us the details. You’ll get a written price, a documented photo record, a 365-Day Done Right Promise, and a written warranty. Call (844) 797-6388 for a free estimate, and we’ll answer on the first ring.
Written by the team at Rowan Construction Group San Francisco.












