







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose Toto Construction
We provide independent Toto construction service in San Francisco: we install, repair, and remodel around Toto toilets, Washlet seats, and lavatory sinks, and we source Toto OEM parts whenever they’re available. What sets our Toto work apart is model-level familiarity – we know the fill valves inside an Ultramax II, the control boards behind a Washlet, and the rough-in measurements a Drake needs in an old San Francisco bathroom. Rowan Construction Group San Francisco is an independent service provider and is not affiliated with, sponsored by, or authorized by Toto. Call (844) 797-6388 for a free estimate.
Why Trust Rowan Construction Group San Francisco for Your Toto Construction?

Our technicians have up to 19 years of experience, and a good share of that time has been spent with Toto fixtures in San Francisco’s older housing stock – the pre-war flats and Edwardian buildings where a 1990s Ultramax II is still doing daily duty and a newer Washlet sits in a renovated primary bath down the hall. That familiarity matters because Toto’s lineup spans two very different repair worlds: mechanical porcelain toilets that need valves, gaskets, and bolts, and electronic bidet seats that need circuit testing and control-board diagnosis. We handle both.
Parts sourcing follows the same discipline. We use genuine Toto OEM fill valves, flush valves, tank-to-bowl gaskets, and Washlet control boards when they’re available for your model. When a part has been discontinued, we’ll tell you plainly and offer a quality aftermarket equivalent – only with your approval, never as a silent substitution. That approach keeps your Toto warranty intact where it applies, because warranty-safe service means OEM parts and documented work, not the cheapest valve on the shelf. Every Toto job starts with a written price and a written scope before anyone touches the fixture, which is Clause 1 of The Haven Standard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in San Francisco
Here are the Toto failures we see most often in San Francisco homes, and what actually causes them.
- Washlet control board and sensor failures. Toto Washlet seats – the S550e, the C200, and older models still running in San Francisco condos – commonly lose their seat heat or lock up their bidet functions after years of humidity and power surges. The board or a sensor is usually the culprit, not the whole seat. A qualified tech tests the circuit before swapping parts.
- Fill and flush valve wear in Ultramax II and Drake toilets. Phantom flushing (the toilet refills itself at random) and a weak flush usually trace to a worn fill valve, sometimes compounded by sediment from older city pipes clogging the rim jets. It’s a valve-and-cleaning job far more often than a new-toilet job.
- Tank-to-bowl gasket leaks and bolt corrosion in one-piece Totos. The Nexus and Soiree one-piece toilets common in mid-century and condo bathrooms develop slow leaks at the tank-to-bowl joint as the gasket ages, and their bolts corrode faster in homes with seismic movement and older plumbing. Left alone, that leak damages the floor and the ceiling below.
- Bidet seat supply-line leaks and inlet filter clogs. Electronic Washlet seats connected to hard water or older galvanized lines clog their inlet filters and can develop supply-line leaks at the connection. We flush the filter, check the line, and replace the braided supply when it’s past its useful life.
- Rough-in mismatches on replacement installs. A new Toto Drake dropped into an older San Francisco bathroom sometimes meets a rough-in that doesn’t match the flange position, which shows up as rocking, a poor seal, or a gap at the wall. Measuring the rough-in before the box is opened saves the return trip.
A typical job runs like this: a Toto Ultramax II in a pre-war San Francisco flat starts running intermittently and the flush weakens. The usual cause is a worn fill valve and mineral-clogged rim jets from the building’s older pipes. A pro replaces the fill valve, cleans the rim, and checks the supply line. For a Washlet that won’t heat, the control board or the seat’s inlet filter is usually behind it.
Toto Parts & Our Repair-vs-Replace Approach

We don’t claim to stock Toto parts locally. What we do is source the right part for your exact model – OEM fill valves, flush valves, gaskets, and Washlet control boards when they’re available, quality aftermarket equivalents only with your approval when they’re not – and we put the part number and price in the written quote before ordering.
Repair is usually the honest answer for Toto toilets and Washlets. Porcelain bowls and tanks last decades, and the mechanical parts inside them are serviceable. Full replacement only makes sense when the ceramic is cracked or the electronic core of a Washlet is obsolete and no board will bring it back. We’ll tell you which side of that line you’re on, with the reasoning and the price for each option. Call (844) 797-6388 for an exact quote on your Toto repair or install – estimates are free.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We inspect the specific Toto model, test the fill and flush cycle on mechanical toilets, and check the circuit and inlet filter on Washlet seats. You get a written finding – what failed and why – plus the photo record of what we found.
- 2
Repair or install. For repairs we source the correct Toto part for your model. For installations – a new Drake, a Nexus, a Silas sink – we verify the rough-in, flange, and supply before setting the fixture. Any change to the agreed scope requires a signed change order first.
- 3
Test. We run the full cycle: flush volume, fill level, shutoff, seat heat, bidet function, and leak check at every connection. We photograph the finished work as part of the record.
- 4
Warranty. Your Toto warranty paperwork stays intact when we use OEM parts and documented service. Our own work is covered by the 365-Day Done Right Promise – if it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in San Francisco
We work on the Toto models San Francisco homeowners actually own: the Ultramax II and Drake two-piece toilets, often original to older remodels; the Nexus and Soiree one-piece toilets common in mid-century and condo bathrooms; the Washlet electronic bidet seats, including the S550e, the C200, and older models; and the Silas and Lloyd lavatory sinks, frequently paired with tile and stone counters. We service and install them all, and we remodel the bathrooms they live in. We do not claim to stock these products locally – we source them per job.
We Also Service These Brands
Toto is one part of what we do. Rowan Construction Group San Francisco also services and installs KraftMaid and Kohler fixtures and cabinetry, GAF roofing systems, and PGT windows, among the fifty-plus vetted brands in our sourcing network. That means a bathroom remodel with Toto fixtures, a Kohler vanity, and KraftMaid cabinets gets quoted as one job with one written price, not three contractors with three schedules.
FAQs – Toto Construction Service in San Francisco

Yes. A Washlet that won’t heat or whose bidet functions lock up is usually a control board or sensor failure, sometimes an inlet filter clog – we test the circuit and the water supply before replacing parts. Call (844) 797-6388 to schedule a diagnostic.
No, though a worn fill valve is the most common cause. Mineral-clogged rim jets from older pipes can mimic a valve problem by weakening the flush and causing the toilet to refill itself. We check both before quoting the repair.
Sometimes. Older San Francisco bathrooms don’t always match the rough-in a new Drake expects, which can cause rocking, a poor seal, or a gap at the wall. We measure the rough-in before ordering so the install fits the first time.
Yes. The Silas pairs well with tile and stone counters, and we handle the cutout, setting, and drain connection as part of a vanity installation. Call (844) 797-6388 for a free estimate on the vanity and sink together.
A full bathroom remodel in San Francisco runs $10,620 – $33,040 depending on size, layout changes, and fixture selection; a walk-in shower installation runs $5,310 – $14,160, and a bathroom vanity installation runs $945 – $3,540. Call (844) 797-6388 for an exact quote – estimates are free and the price is written before any work starts.
| Toto Bathroom Service | San Francisco Price Range |
|---|---|
| Full Bathroom Remodeling | $10,620 – $33,040 |
| Walk-In Shower Installation | $5,310 – $14,160 |
| Bathroom Vanity Installation | $945 – $3,540 |
No. We’re an independent Toto service provider – not affiliated with, sponsored by, or authorized by Toto. We service Toto products because we know them, and we say so plainly rather than implying a manufacturer relationship we don’t have. Call (844) 797-6388 for a free estimate.
Book Your Toto Service in San Francisco, CA
Whether it’s a Washlet that stopped heating, an Ultramax II that won’t stop running, or a full bathroom remodel built around Toto fixtures, we’ll diagnose it, put the price in writing, and get it done right. Call (844) 797-6388 to schedule your free estimate in San Francisco.
Written by the team at Rowan Construction Group San Francisco.












