A Rowan company - serving San Francisco, CA
A home with a brand-new roof and gutters at golden hour
GAF · San Francisco

GAF Construction Service in San Francisco, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in San Francisco
A new roof with clean valleys and new flashing
A new clay tile roof
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why San Francisco Homeowners Choose GAF Construction

Rowan Construction Group San Francisco provides independent GAF roofing service in San Francisco: repair, replacement, and installation of GAF shingle systems, including Timberline HDZ, Timberline UHDZ, and GAF Liberty low-slope roll roofing. We’re an independent GAF service provider, not a GAF dealer or authorized contractor, and that independence is deliberate. We read the same published installation specs a GAF warranty inspector reads, then build a roof assembly that survives fog, salt air, and wind. On a 25-foot-wide lot in Noe Valley or a hill cut in Potrero Hill, that distinction decides whether the roof lasts 12 years or 30. Call (844) 797-6388 for a free written estimate.

Call (844) 797-6388

Why Trust Rowan Construction Group San Francisco for Your GAF Construction?

New architectural shingles with a clean valley

GAF makes four systems we work on regularly, and each behaves differently under San Francisco conditions. Timberline HDZ is the architectural shingle we see most. Timberline UHDZ is the premium layer, heavier and warrantied differently. Timberline AS II is the old three-tab still sitting on 1970s and 1980s roofs. GAF Liberty is the self-adhered roll roofing on low-pitch additions and converted garages, common where a Sunset or Richmond rear extension has almost no slope.

Our technicians have up to 19 years of experience, and that experience is where GAF knowledge lives or dies. We know the nailing window on HDZ shingles by heart, we know what a high nail looks like from a ladder, and we know which GAF underlayments and ice-and-water shield detailing the assembly requires at valleys and step flashing. We use GAF shingles and accessories that match the published assembly. Where a quality aftermarket underlayment meets or exceeds GAF’s spec, we explain the trade-off before the crew arrives, so you can decide with a written comparison, not a shrug.

Rowan operates under The Haven Standard. Clause 1 is simple: the price is written before anyone starts. That holds on a $470 flashing repair and on a full replacement. You get a written scope, a flat price, and a 365-Day Done Right Promise. If the work isn’t done right, we make it right.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common GAF Construction Problems We Fix in San Francisco

San Francisco roof failures follow patterns. The fog, salt, and wind do their part, and installation shortcuts do the rest. These are the five we see most.

  • Timberline HDZ sealant strips that never activated. On exposed ridges in areas like Russian Hill and the outer Sunset, wind-driven rain and coastal fog keep the shingles cool enough that the factory sealant strip doesn’t thermally seal. The tabs lift, and under the next storm they blow off. This isn’t a wind problem alone; it’s a sealing-temperature problem the installer should plan around.
  • Premature granule loss on south- and west-facing Timberline slopes. UV exposure plus salt-laden marine air accelerates surface erosion. When granules disappear in patches before the shingle is 15 years old, that’s a climate effect, not necessarily a defect. It changes the replacement timeline.
  • Valley, step-flashing, and chimney-counterflashing leaks. The most common cause is an original install that skipped GAF’s required ice-and-water shield and underlayment detailing at these points. Water gets behind the shingle course and finds the ceiling a story below, long after the shingle surface looks fine.
  • Nailing errors that void the wind rating. High nails, over-driven fasteners, and nails outside the fastening zone all show up on inspection. Any of them lets water track behind the shingle and reduces the assembly’s wind rating to nothing.
  • GAF Liberty roll roofing lifting at seams on low-slope additions. Adhesion depends on a clean, dry, correctly primed deck. On a San Francisco addition where fog keeps the surface damp, a rushed install lifts at the lap within a season. The fix is deck prep and primer discipline, not more adhesive.

GAF Parts & Our Repair-vs-Replace Approach

Roofers installing a new roof with safety harnesses

Every GAF job starts with matching parts to the actual assembly, not to whatever a supply house happened to have. We specify genuine GAF shingles and accessories that match the published system, because a Timberline HDZ repair needs HDZ shingles of the correct color and profile, plus starter strip, ridge cap, and underlayment that meet the same spec. We don’t claim to stock GAF parts locally: parts are ordered to the job, and the written quote names them.

The repair-or-replace call is where we’re most careful. Isolated flashing, ridge, or wind damage on an otherwise sound roof is a targeted repair, and it’s usually a fraction of replacement cost. Once field shingles show widespread granule loss or the deck feels soft underfoot, replacement is the honest recommendation. We say which one, with the evidence, before you commit.

Call (844) 797-6388 for an exact quote. Estimates are free, and we’ll review any written estimate you already have, line by line, at no charge.

Our GAF Service Process – Step by Step

  1. 1
    Diagnosis. We get on the roof, photograph the shingle type, fastening pattern, underlayment exposure at valleys and flashing, and any granule loss. You receive a documented photo record of what we found, as a standard deliverable on every visit.
  2. 2
    Written scope and price. The quote names the GAF shingle line and color, the underlayment and ice-and-water shield detailing, the flashing work, and a flat price. No work starts before you have the number in writing.
  3. 3
    Repair or install. Repairs nail to GAF’s required exposure and fastening zone, with matching shingles. Installations follow GAF’s published assembly sequence, deck to ridge. Any scope change waits for a signed change order; that discipline is why projects finish within a few percent of the agreed cost.
  4. 4
    Verification and warranty. We walk the roof, confirm flashing and exposure, and hand you the written warranty and the photo record. Crews are background-checked and uniformed, and a live person answers calls 24/7.

A typical job: a homeowner sees shingle tabs lifting along a wind-exposed ridge after a winter storm, then a damp stain on the ceiling below. Usually the sealant strips never activated, or the nailing sat too high, so wind got under the course and water tracked past the underlayment. A qualified roofer checks the deck and flashing, replaces the damaged courses to GAF’s required exposure and nailing pattern, and verifies the whole assembly instead of patching the visible tabs.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

GAF Products We Service & Install in San Francisco

We service and install the GAF systems that fit San Francisco’s housing stock. Timberline HDZ covers the majority of residential replacement and repair work on pitched roofs. Timberline UHDZ is for homeowners who want the heavier, premium architectural line. Timberline AS II repairs keep older three-tab roofs going where replacement isn’t yet warranted. GAF Liberty self-adhered roll roofing handles the flat and low-slope additions, converted garages, and rear extensions that show up on nearly every block in the city. Starter strips, ridge cap, underlayments, and ice-and-water shield accessories come matched to the published assembly. Metal and tile roof systems are available through our other roofing lines when the house calls for something other than asphalt.

We Also Service These Brands

Rowan Construction Group San Francisco isn’t tied to one manufacturer. Alongside GAF, we install and service KraftMaid and Wellborn cabinets for kitchen and bath work, Kohler and Toto fixtures, PGT impact windows and doors, and Master Halco fences. Sourcing across fifty-plus vetted brands is what lets the written quote land on honest numbers, not inflated ones.

FAQs – GAF Construction Service in San Francisco

A new stained cedar privacy fence

Service Price Range
Roof Repair $470 – $2,125
Roof Replacement $9,440 – $23,600
Metal Roof Installation $17,700 – $47,200
Tile Roof Repair $710 – $2,950

Steep hills and narrow streets in places like Russian Hill, Potrero Hill, and Noe Valley can push a job toward the top of range when crews hand-carry materials because a truck or mixer can’t reach the door. Call (844) 797-6388 for an exact quote. Estimates are free, and we review any written estimate line by line at no charge.

Book Your GAF Service in San Francisco, CA

If your GAF roof needs a diagnosis, a repair, or a replacement built to GAF’s published assembly, bring us the details. You’ll get a written price, a documented photo record, a 365-Day Done Right Promise, and a written warranty. Call (844) 797-6388 for a free estimate, and we’ll answer on the first ring.

Written by the team at Rowan Construction Group San Francisco.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home officeA finished backyard cottage with a small covered porchA new multi-panel patio door opening a kitchen to the patioA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in shower

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in San Francisco

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your San Francisco team

A local vetted partner works across San Francisco and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6388
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Rowan Construction Group San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch