







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors in San Francisco: What to Know First
Window replacement in San Francisco typically runs $5,310 – $17,700, and impact-rated window installation runs $9,440 – $29,500 depending on opening count, glazing package and whether the frames are sound. We’re an independent PGT service provider, which means we diagnose and replace PGT windows and doors without any manufacturer affiliation – and we put the number in writing before anyone picks up a tool. This page is for PGT owners in San Francisco whose windows are fogging, sticking, leaking at the sill, or due for replacement, and it explains how these units actually fail here.
Call Rowan Construction Group San Francisco at (844) 797-6388 for a free estimate. Under Clause 1 of The Haven Standard, the price is written before any work starts.
How PGT Products Fail – and How We Fix Them
PGT builds a wide catalog, and the San Francisco homes we work in tend to carry a few recurring lines: WinGuard impact units in newer construction and post-retrofit work, Estate Collection wood-and-aluminum units in prewar Pacific Heights and Presidio Heights houses, and aluminum series in condos around SoMa and Mission Bay. Each fails differently. What we find most often:
- Fogged insulated glass on WinGuard and aluminum slider lines. The seal between the panes fails and the argon escapes, and once moisture is inside the unit there is no cleaning it out. This is a glazing failure, not a frame failure, so the fix is a measured insulated glass unit swap – we match the spacer type and low-E coating so the new IGU matches the rest of the opening rather than looking like a patch.
- Sticking or dragging sliders on aluminum doors. San Francisco’s fog belt pushes daily moisture into the roller track, and the rollers sit in salt-laden air near the Marina and Outer Richmond. Rollers flat-spot and the track pits. We pull the door, replace the roller assemblies, and re-set the track so the door glides again instead of being forced. Forcing it is what cracks the frame corner welds.
- Weep weepage and sill rot on wood-clad Estate Collection units. The weep system on these units clogs with debris and the wood substrate behind the cladding absorbs water. Surface caulk hides this for about a season. What actually matters is the condition of the rough sill and the flashing behind the unit, and we photograph both before quoting so you can see it.
- Failed weatherstripping and latch hardware on casement and awning PGT windows. These parts are wear items, and the original profiles are often discontinued on older series. We source OEM hardware where it’s still produced and a matched aftermarket equivalent where it isn’t, and we tell you which one you’re getting and why.
- Impact glass cracking from thermal stress and seismic settling. San Francisco homes move, and a hard-set impact unit in a racked frame takes stress at the corners. Cracks that look random usually trace back to frame deflection, so we check plumb and square before we order glass – replacing the pane without addressing the frame simply cracks the next one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our PGT Windows & Doors Process
- 1
Photo-documented diagnosis. A background-checked, uniformed technician inspects each unit, tests operation, checks the rough opening and photographs the failure. You get the photo record as a standard deliverable, not an add-on.
- 2
Parts decision, in writing. We identify the PGT series, confirm whether OEM parts are still in production, and quote OEM versus a matched aftermarket equivalent side by side. You choose. Nothing is ordered without your signed approval.
- 3
The repair or replacement. IGU swaps, roller and hardware replacement, weatherstripping, and full unit replacement when the frame is beyond saving. Our technicians have up to 19 years of experience, including on PGT product lines.
- 4
The operation test. Every unit gets opened, closed, locked and water-tested at the sill before we call it done.
- 5
The written closeout. You receive the photo record, the signed change orders (if any), and the written warranty covering the work. Under the 365-Day Done Right Promise, if it isn’t done right we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Windows & Doors Costs in San Francisco

These are the numbers we work from in this market. The range is wide because the opening count and glazing package drive the job far more than the brand does.
- Window replacement, typical PGT openings: $5,310 – $17,700
- Impact window installation (WinGuard-class glazing): $9,440 – $29,500
- Single insulated glass unit (IGU) swap: quoted per opening; usually the low end of the replacement range when only the glass has failed
- Slider roller and track rebuild: priced as a hardware repair, not a replacement
What moves the price: how many openings, whether the frame is sound or racked, impact versus standard glazing, and whether the rough opening needs reframing. Bring us a competitor’s written estimate and we’ll review it line by line at no charge – that’s the Free Second Opinion. Call (844) 797-6388 for a free estimate with a flat, written price.
Why San Francisco Homeowners Call Rowan Construction Group San Francisco for PGT Work
Every project we’ve delivered carries a written price before work started and a documented record when the crew left, and no change proceeds without a signed change order. That’s the discipline that keeps projects within a few percent of the agreed number. Calls are answered by a live person, and every crew member is background-checked and verified before they arrive at your door.
PGT is one piece of what we do. We also work across KraftMaid, Kohler, GAF and Master Halco, and the same written-price-before-work process applies to every trade we run. If your PGT project turns up a rough sill that needs carpentry or a roofline flashing detail that’s contributing to a leak, we handle the adjacent scope instead of handing you off. Free Second Opinion on any written estimate, and a written warranty on the finished work.
FAQs

Replacing a failed IGU or worn hardware with matched components generally preserves the warranty on the surrounding unit, but an unauthorized modification or a mismatched glazing package can void it. We check your PGT documentation before we quote and propose the option that keeps the warranty intact. Call (844) 797-6388 and we’ll walk through it with you.
Often, but not always. PGT has discontinued some historic hardware and weatherstripping profiles, and where the OEM part is gone we source a matched aftermarket equivalent and tell you the trade-off before ordering. We never swap in an unmatched part and call it done.
Repair if the frame is plumb and only the glass or hardware has failed – an IGU swap or roller rebuild costs a fraction of replacement. Replace if the frame is racked, the sill has rotted behind the cladding, or the series no longer has parts support. We’ll show you the photo evidence and let you decide.
A single IGU swap or hardware repair is typically handled in one visit once parts are in hand; a multi-opening replacement runs longer and depends on whether reframing is needed. We give you the timeline in the written quote, not over the phone after the fact. Call (844) 797-6388 to schedule your free estimate.
Yes. We install and service impact-rated glazing (including WinGuard-class openings) as well as sliding and patio doors, which account for a large share of the PGT work we see in San Francisco condos and newer builds. Impact installation in San Francisco typically runs $9,440 – $29,500; call (844) 797-6388 for an exact quote, and estimates are free.
San Francisco owners of PGT windows and doors run into the same handful of problems – failed seals in the fog belt, flat-spotted slider rollers in the salt air, rot behind wood cladding on older units. We diagnose each one with a photo record, quote OEM and matched aftermarket parts side by side, and put the price in writing before any work starts. Call Rowan Construction Group San Francisco at (844) 797-6388 for a free estimate and a flat, written price on your PGT job.
Written by the team at Rowan Construction Group San Francisco, serving San Francisco and nearby areas.












