







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose PGT Construction
Rowan Construction Group San Francisco provides independent PGT repair and installation service across San Francisco – glass unit replacement, sash and roller repair, weatherstripping renewal, and full impact window installation. What sets our PGT work apart is that we read PGT’s own product literature, match the profile to the correct series, and specify OEM or equivalent hardware rather than defaulting to a generic retrofit. We’re not authorized or affiliated with PGT; our recommendations come from field performance in San Francisco housing stock, not a dealer agreement. Call (844) 797-6388 for a free estimate.
Why Trust Rowan Construction Group San Francisco for Your PGT Construction?

PGT makes several distinct window and door families, and they don’t age the same way. A WinGuard laminated impact unit fails differently from a Renewable Series vinyl single-hung, and an Aluminum Series sliding patio door has its own wear pattern on rollers and track. Our technicians have up to 19 years of experience and know which series is in front of them before they touch a screwdriver – casement versus single-hung, impact-rated versus non-impact, vinyl versus aluminum frame.
That matters because the parent product lines carry specific part numbers. We source OEM PGT replacement sashes, glass units, rollers, and hardware where the series is still supported, and use quality aftermarket equivalents only for discontinued profiles or non-structural hardware. Nothing gets forced to fit. Every job quotes a flat written price before work starts, no change proceeds without a signed change order, and every visit leaves you a documented photo record of what we found and what we did. Workmanship is covered by our 365-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in San Francisco
These are the failures we see most often on PGT products in San Francisco’s coastal, wind-driven-rain environment. Each one has a real cause, and none of them are solved by a fresh coat of exterior caulk alone.
- Glazing seal failure on WinGuard laminated impact units. The laminated pane hazes, fogs between the interlayer and the sealed airspace, or the interlayer begins to delaminate. This is a sealed-unit failure, not a cleaning issue – the moisture is trapped inside the assembly, and it worsens with San Francisco’s constant fog and temperature swings between west-facing walls and interior rooms.
- Sliding glass door roller and track wear on PGT aluminum patio doors. The panel drags, tracks hard, or catches at the jamb. Impact-rated sashes are heavier than standard ones, so the rollers fatigue faster and the track accumulates grit. Left alone, a dragging panel scores the track and turns a roller replacement into a full door replacement.
- Weatherstripping and sweep deterioration on coastal-exposed units. Gaskets shrink and door sweeps tear, admitting wind-driven rain and drafting cold air. Salt-laden air accelerates this on units facing the ocean side, especially on north- and west-facing elevations in the Sunset and Richmond districts.
- Frame and sill water intrusion at vinyl series units. Sealant at the perimeter and the sill pan detail ages out, and water finds the gap. On windward exposures, this shows up as interior sill staining long before it’s visible from outside. Often the window is blamed when the flashing or roof-to-wall detail above it is the actual source.
- Hardware and operating-mechanism wear on casement and single-hung units. Cranks strip, hinges loosen, and sash locks stop pulling the unit tight. On older Renewal Series units, worn hardware lets the sash sit slightly open, which stresses the weatherstripping and starts the water intrusion cycle above.
PGT Parts & Our Repair-vs-Replace Approach

A WinGuard impact window or sliding door that’s been in service for years typically shows up as a cloudy or hazy laminated pane, a door that no longer tracks smoothly, or water staining at the interior sill after a wind-driven storm. The cause is usually a failed sealed glass unit or aged rollers and weatherstripping, sometimes compounded by perimeter sealant that’s pulled away from the frame.
A qualified local pro confirms whether the sash or glass unit can be replaced inside the existing PGT frame, verifies the sill pan and flashing detail, and only escalates to full unit replacement when the frame or glazing is beyond repair. We don’t stock PGT parts locally – every part is sourced to the specific series and ordered for your job. When the frame and sill are sound, glass-and-hardware repair is the honest call. When laminated impact units have failed seals across most of the elevation or the frame has taken water, replacement is the defensible recommendation. Call (844) 797-6388 and we’ll tell you which one your window actually needs – estimates are free.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the exact PGT series and model, test the glass unit and operating hardware, and check the sill pan, flashing, and the wall or roof detail above the opening. Many “window leaks” in San Francisco trace to the roof-to-wall junction, not the window itself.
- 2
Written recommendation and flat price. You get a written scope saying whether we’re repairing the sash and glass or replacing the unit, a flat price, and a written warranty – before any work starts. If a change comes up mid-job, no work proceeds until the change order is signed.
- 3
Repair or installation. OEM PGT replacement sashes, glass units, rollers, and hardware installed to the series’ spec, with new perimeter sealant and sill detail. No generic retrofit parts forced to fit.
- 4
Test and documentation. We operate every unit, check for air and water infiltration, and photograph the finished work. You get the photo record as part of the job, not as an add-on.
- 5
Warranty. Workmanship is backed by our 365-Day Done Right Promise: if it isn’t done right, we make it right.
PGT Products We Service & Install in San Francisco
We work on PGT WinGuard Aluminum Impact Series in fixed, casement, and single-hung configurations, and PGT WinGuard Vinyl Impact Series for residential openings where the vinyl profile suits the wall assembly. We service PGT Aluminum Series sliding glass doors, including roller, track, and sweep replacement, and the PGT Renewable Series vinyl single-hung and casement units common on San Francisco remodels. Window replacement and impact window installation are our two most-requested PGT services here, and roof repair frequently comes up in the same conversation because a failed window seal and a roof-detail leak look identical from inside the room. Call (844) 797-6388 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
PGT is one part of what we handle. We also work on KraftMaid cabinetry, Kohler and Toto fixtures, GAF roofing systems, and Master Halco fencing, so a window or door project that turns into a wider repair doesn’t need a second contractor. If your written estimate from another company covers any of these, bring it in – we offer a free second opinion, reviewed line by line.
PGT Construction Costs in San Francisco

PGT service in San Francisco runs from a few hundred dollars for a hardware or weatherstripping repair to a full impact window installation in the five-figure range, depending on how many units are involved and whether the frame can stay. These are the ranges we quote:
| Service | Price Range |
|---|---|
| Impact Window Installation | $9,440 – $29,500 |
| Window Replacement | $5,310 – $17,700 |
| Roof Repair | $470 – $2,125 |
| Roof Replacement | $9,440 – $23,600 |
Written quotes are flat price with a written scope. Call (844) 797-6388 for an exact quote – estimates are free.
FAQs – PGT Construction Service in San Francisco
No. We’re an independent PGT service provider, not authorized or affiliated with PGT. Our recommendations are based on field performance in Bay Area housing stock rather than a dealer agreement, and we source OEM parts directly where the series is supported.
Yes, OEM PGT replacement sashes, glass units, rollers, and hardware wherever the series is still supported. We use quality aftermarket equivalents only for discontinued profiles or non-structural hardware, and we tell you which is which in the written quote. Call (844) 797-6388 to schedule your free estimate.
A hardware or weatherstripping repair is typically a single visit. A glass-unit replacement depends on lead time for the specific PGT series, since we don’t stock parts locally and order to the job. Full impact window installation is scheduled around fabrication and permit timing, and we give you the timeline in writing before work starts.
WinGuard Aluminum Impact Series (fixed, casement, single-hung), WinGuard Vinyl Impact Series, Aluminum Series sliding glass doors, and Renewable Series vinyl single-hung and casement units. If you’re not sure which you have, the glass etch or frame label usually identifies it.
Not if the work is done correctly. Using OEM parts and following the series’ installed specs is the way to keep coverage intact. We document what we replaced and why, which matters if you ever file a claim. Call (844) 797-6388 for a free estimate.
Impact window installation runs $9,440 – $29,500, standard window replacement $5,310 – $17,700, and roof repair $470 – $2,125. Exact numbers depend on unit count, series, and whether the frame stays. Call (844) 797-6388 for an exact quote – estimates are free.
Book Your PGT Service in San Francisco, CA
If your PGT windows or doors are fogging, dragging, or letting water in, get a written answer before anyone picks up a tool. Rowan Construction Group San Francisco diagnoses the actual cause – glass unit, hardware, sill detail, or the roof above it – and quotes a flat written price. Call (844) 797-6388 for a free estimate.
Written by the team at Rowan Construction Group San Francisco.












