







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Burlingame
If you own a home in Burlingame, you already know the wind off the bay can push a cheap fence over in a single wet winter. That is the reason we build fence work here around load ratings, footing depth, and the paperwork that proves both. We connect Burlingame homeowners with independent local professionals who pull the permits, document what they found, and leave you with a written scope of work rather than a verbal promise. Call (844) 797-6388 for a free estimate and a written price before any post goes in the ground.
Why Rowan Construction Group San Francisco Is Burlingame’s Preferred Fence Installation Company

Rowan Construction Group works under The Haven Standard, which means every job gets a flat written price and a written scope before a shovel touches soil, and no change moves forward without a signed change order. That discipline is why our projects come in within a few percent of the number the customer agreed to. In Burlingame, that same approach matters for fences because the local code and the bayfront soil both punish shortcuts.
Our technicians have up to 19 years of experience, are background-checked and uniformed, and every visit includes a documented photo record as a standard deliverable. You get a live person on the phone 24/7, and the estimate you receive is written out line by line. If you already have a quote from another contractor, we’ll review it line by line at no charge under our Free Second Opinion offer.
What we’ve learned in Burlingame specifically is that the fence failures here usually trace back to the ground, not the panels. Past the Easton Addition and toward the bayfront, the water table stays high through the wet season, and posts set shallow in untreated wood wick up moisture and rot from the bottom. That’s the kind of local condition you only understand after doing the work around here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Burlingame
We focus on the fence types that Burlingame lots actually need. Three of them carry most of the calls: wood fence, privacy fence, and fence gates, with vinyl and aluminum close behind for hillside and bayfront properties.
Wood Fence
Wood is the default on the pre-war flatland lots, where a board-on-board or dog-eared cedar run matches the housing stock and the property lines that predate modern setbacks. In Burlingame, the material choice matters more than the style: pressure-treated or naturally decay-resistant posts set in concrete keep a wood run standing where a softwood, shallow-set fence would rot within a few seasons. That’s ground work, not finish work, and it’s where a Burlingame job is won or lost.

Privacy Fence
Privacy runs along shared property lines are the second most common request, and in Burlingame they come with a specific set of headaches. The older lots near Burlingame Gardens often have property lines that don’t match the plat drawings, and a privacy fence installed without checking the setback hits a dispute at inspection. We set the height and location to what the local code and your lot allow so the fence clears the review rather than triggering a change order to shorten or move it.

Fence Gates
Gates are the part of a fence that gets used every day, so the hardware has to be rated to the same load as the panels. On wind-exposed runs in Burlingame Hills, a gate hung on undersized hinges and a light frame sags within a year once the wind works at it. We set gates with rated hinges and latch hardware sized to the panel, and we document the footing and hardware so the assembly holds up to a future inspection.

Aluminum Fence
Aluminum is a sound pick for bayfront and hillside lots where rot and rust are the long-term concerns and a painted finish holds up to the salt air. A typical aluminum fence installation in Burlingame runs $4,000 – $10,000 depending on height, spacing, and how much bracing the wind exposure calls for.
Trusted Brands We Service in Burlingame
We source fence hardware and metal components from names you can look up and verify – Sterling gate hardware and Grohe fixtures on the landscape side, and we reference GAF and CertainTeed where a fence ties into a roof or gutter project on the same property. We don’t stock parts locally, so we don’t claim to. What we do is quote the rated products the local wind-load rules require and give you a turnaround that fits the permit timeline, not one that skips it.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Burlingame Homes
Most of the fence trouble we see in Burlingame traces back to the ground and the paperwork. Here’s what actually goes wrong:
- Posts set in shallow, undrained soil near the bay. Along the Easton Addition and toward Burlingame Lagoon, the water table sits high through the wet season, and posts set too shallow heave, lean, and rot from the bottom up. The fix is a deeper, concrete-set footing, not a bigger panel.
- Wind-exposed runs on the hillside. Fence lines in Burlingame Hills that face the open wind fail load checks when a cheap quote skips the rated posts, hardware, or bracing the local code requires. That omission looks like savings until the first storm.
- Fences installed without permits on pre-war lots. Many flatland lots date to the early 20th century, and a fence put up without a permit hits a property-line or setback dispute at inspection, which forces a costly change order or a teardown.
- Untreated wood in wet ground. A wood fence built with untreated posts in Burlingame’s high-water-table soil wicks moisture up the post and rots the base first, well before the panels show wear.
Pricing for Fence Installation in Burlingame, CA
Fence installation in Burlingame typically costs $3,500 – $9,000, with the number set by run length, material, and how deep the footings have to go for the soil and wind exposure. A vinyl run in the same range comes out at $3,500 – $9,000, while aluminum, which needs more bracing on hillside lots, lands at $4,000 – $10,000. The deeper concrete-set footings that bayfront and high-water-table lots need are a cost that shallow inland quotes don’t include, so compare line items, not totals. We give a flat written price with a written scope before any work starts. Call (844) 797-6388 for a free estimate.
| Fence service (Burlingame) | Typical price range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
We Also Serve Cities Near Burlingame
The same footing, wind-load, and permit discipline we bring to Fence Installation in Burlingame carries into the neighboring areas we serve: Millbrae, South San Francisco, San Francisco, and Alameda. If your property sits just over the Burlingame line, tell us the address and we’ll confirm coverage and the local code that applies. Call (844) 797-6388 to schedule a free estimate.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Burlingame

Yes – most fence installations in Burlingame require a permit and a final inspection sign-off, and the review is where setback and property-line disputes surface. Because so many flatland lots date to the pre-war era, the platted line and the physical line don’t always match, so a permit review is also your protection against a costly change order or teardown after the fact. Call (844) 797-6388 to schedule a free estimate and we’ll walk you through the permit steps for your lot.
A Burlingame fence has to be built to the wind-load requirements set for the site, which means rated posts, rated hardware, and bracing sized to the exposure – not a generic panel dropped in. Wind exposure is worse on hillside lots in Burlingame Hills, where an open run takes the full force of the bay wind, so a quote that skips rated components is a quote that won’t pass inspection. Call (844) 797-6388 for a written estimate that specifies the rated products.
A fence installed with documented permits and inspection sign-off gives your insurer a clean paper trail, which matters if wind later takes out a run and you need to file a claim. Undocumented work can complicate a claim and, at renewal, raise questions you’d rather not answer. We include the documented photo record and the written scope as standard so the footing depth and materials are on file. Call (844) 797-6388 to schedule a free estimate.
Wood fences rot faster in Burlingame because the high water table near the bay and Burlingame Lagoon keeps the soil wet through the wet season, so a post that would dry out inland stays saturated here. Posts set too shallow in untreated wood wick that moisture up and rot from the base, which is why pressure-treated or decay-resistant posts in deeper concrete-set footings are the correct build for this ground. Call (844) 797-6388 for a written price before work starts.
A compliant Burlingame fence quote includes the permit and inspection sign-off, footing depth sized to the high-water-table soil, rated posts and hardware to meet the local wind-load requirement, and a written scope of work that documents all of it for a future insurance review. A cheap quote typically leaves out the deeper footings, the rated hardware, and the permit, and those are exactly the line items that fail first. Call (844) 797-6388 for a free estimate and a Free Second Opinion on any quote you already hold.
When you’re ready to put a number on the page, call (844) 797-6388 for a free estimate. We’ll write out the price and the scope, name the rated products your Burlingame lot needs, and back the work with our 365-Day Done Right Promise – if it’s not done right, we make it right.
Written by the team at Rowan Construction Group.












