







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tub-to-Shower Conversion Cost in San Francisco?
Tub-to-shower conversion in San Francisco typically costs $4,130 to $11,800, with most single-bathroom projects landing in the $6,000 to $8,500 range. That figure covers demolition of the old tub, rough plumbing and drain relocation, a new waterproof membrane, tile or a prefab pan, a shower valve and trim, and a glass enclosure or curtain rod. The spread between the low and high end comes down to tile choice, drain location, and whether the wall behind the tub is sound or hiding rot.
We put the price in writing before anyone picks up a tool. Under Clause 1 of the Haven Standard, the number you agree to is the number you pay unless a change order is signed first, and no work proceeds on a change until that signature is on the page.
Key Takeaways
- Typical San Francisco tub-to-shower conversion: $4,130-$11,800, most jobs $6,000-$8,500.
- Drain relocation is the single biggest cost swing: moving the drain to center the shower can add $900-$2,400.
- San Francisco’s pre-1950 housing stock means hidden rot and galvanized drain lines surface often, especially in Sunset and Richmond District homes.
- Permits in San Francisco run roughly $400-$1,200 depending on valuation and whether the drain moves.
- A written flat price, a free second opinion on any competitor’s estimate, and a documented photo record on every visit are standard with us.

Tub-to-Shower Conversion Cost Breakdown (2026)
Here’s how the $4,130-$11,800 range breaks down line by line for the San Francisco market in 2026. These are installed prices, meaning labor and materials together, not allowances you have to add to later.
| Line Item | Price Range | What It Covers |
|---|---|---|
| Demo and haul-away | $350-$900 | Removing the tub, surround, and old valve; disposal fees in SF run high because of transfer station costs. |
| Rough plumbing and drain | $600-$2,400 | Relocating the drain, new P-trap, supply lines. Lower end if the drain stays put. |
| Shower valve and trim | $400-$1,100 | Pressure-balance or thermostatic valve, trim kit, showerhead. Kohler and Toto are our common picks. |
| Waterproofing membrane | $500-$1,400 | Schluter Kerdi, RedGard, or a bonded sheet membrane, plus a flood test we photograph. |
| Shower pan or pre-sloped base | $450-$1,600 | Mud-set pan with liner, or a solid-surface pan from a brand like Kohler or Swan. |
| Wall tile and setting | $1,200-$3,800 | Ceramic at the low end; porcelain, marble-look, or large-format at the top. Includes thinset, grout, and labor. |
| Glass enclosure | $700-$2,200 | Framed sliding door at the low end; frameless 3/8-inch glass at the top. |
| Permit | $400-$1,200 | San Francisco DBI permit; required when plumbing or the drain moves. |
What pushes the price up
Two things move the number more than anything else in San Francisco. The first is drain relocation. Tubs sit at one end of the alcove; showers work best with a centered drain. Moving that drain means opening the floor, cutting into the joist bay or furring above it, and re-pitching the trap arm. That’s a $900-$2,400 line, and it’s why a “cheap” quote that ignores the drain is usually a quote you’ll pay twice for. The second is substrate condition. In a Sunset District 1938 row house, the wall behind the tub surround is often original gypsum lath, and two winters of shower spray may have turned the bottom 18 inches to crumble. We can’t know until the surround comes off, so we open one square of wall during the estimate and photograph what we find.
What keeps the price down
A prefab shower pan and acrylic surround lands near $4,130-$5,500 installed. Keeping the drain where the tub drain sits trims $900-$2,400. Using a curtain rod instead of glass saves $700-$2,200 up front, and in a rental or a small Inner Richmond bath it’s often the right call anyway.
What Affects Tub-to-Shower Conversion Pricing in San Francisco
- Building age and hidden rot. Roughly half the homes we open in San Francisco were built before 1950. That means galvanized supply lines, cast-iron drains, and framing that has seen 75+ years of moisture. We price the known scope and handle surprises with a signed change order, never a verbal add.
- Drain location. A centered drain is worth the money in a shower you’ll use daily, but it’s the biggest swing in the quote. Keeping the tub drain position saves you $900-$2,400 and limits the shower footprint.
- Tile choice. Ceramic runs about $4-$9 per square foot installed. Porcelain and marble-look porcelain run $7-$18. Natural stone climbs to $20-$35. On a typical 3-foot-by-5-foot shower wall, that’s a $1,200-$3,800 spread.
- Building type and access. A Victorian flat with a narrow interior stair and a shared garage changes how materials get to the bathroom. A third-floor walk-up in North Beach means hand-carrying a glass panel up two flights. We note access on the written scope because it affects labor hours.
- Permit and inspection timing. San Francisco DBI runs its own schedule. A conversion that touches plumbing needs a permit and one rough inspection before the tile goes up. We don’t skip the inspection to save a week; the inspection is why the permit exists.
- Fixture brand. A Kohler or Toto valve and trim set runs $400-$1,100. Builder-grade imports run less but fail sooner. We source from our vetted brand list so the price you’re quoted reflects a fixture we’ll stand behind.

How to Save on Tub-to-Shower Conversion
Most of the savings here come from decisions made before demo, not haggling after. Our technicians have up to 19 years of experience and will walk you through each of these against your actual bathroom.
- Keep the drain where it is. If the shower will work with the tub drain at one end, skip the relocation. That’s the single largest line item you can control.
- Pick porcelain, not stone. A good porcelain in a marble-look glaze runs $7-$18 a square foot installed and holds up better in a wet environment than honed limestone or travertine. It also doesn’t need annual sealing.
- Reuse the existing valve if it’s recent. If the valve was replaced in the last five years and is pressure-balance rated, we can keep it and change only the trim.
- Choose a prefab pan and surround if the bathroom is small. An acrylic surround runs $4,130-$5,500 installed. It’s not the tile shower in a magazine, but in a 3-by-5 alcove it’s a real shower that cleans with a sponge.
- Get a free second opinion before you sign. Bring a competitor’s written estimate and we’ll review it line by line at no charge. If their scope omits the membrane flood test or the permit, that’s worth knowing before you write a deposit.
- Bundle with a bathroom remodel if the scope is bigger. If the vanity, floor, and toilet also need work, a full bathroom remodeling project often lands at a better per-item price than three separate visits. A San Francisco full bath runs $10,620-$33,040, and a small bathroom remodel runs $5,900-$14,160.
Every estimate we hand over is free and comes with a written flat price, not an hourly rate to be billed later. Call (844) 797-6388 to book one.
What Does a Tub-to-Shower Conversion Include?
A tub-to-shower conversion replaces the tub and its surround with a shower base, waterproofed walls, new tile or an acrylic surround, a new valve and trim (if needed), and a glass enclosure or curtain rod. It includes the demo, plumbing rough-in, waterproofing, tiling, and cleanup. It does not include moving walls, enlarging the bathroom footprint, or relocating the toilet, which is what separates a conversion from a full bathroom remodel. If you want a curbless, fully tiled walk-in with a linear drain and glass wall, that’s closer to a walk-in shower installation at $5,310-$14,160. A straight tub swap without new tile is a shower replacement or a bath fix in the $3,540-$10,030 range.
How Long Does a Tub-to-Shower Conversion Take?
Most conversions take 5 to 8 working days on site. Demo and plumbing rough-in take 1 to 2 days, waterproofing and the flood test (we let the membrane cure, then test overnight and photograph it) take another 1 to 2 days, tile and setting run 2 to 3 days, and glass template and install adds 5 to 10 days of lead time after that. If the drain moves and the floor has to be opened, add 1 to 2 days. San Francisco permits can add another 3 to 10 days before work starts. A bathroom with no working shower for a week and a half is the usual reality, so plan for a backup shower.
Do You Need a Permit for a Tub-to-Shower Conversion in San Francisco?
Yes, when the work involves plumbing changes. San Francisco Department of Building Inspection requires a permit for a tub-to-shower conversion that relocates the drain, changes the valve, or alters the rough plumbing. A permit typically runs $400-$1,200 and includes a rough plumbing inspection before tile goes on. We pull the permit as part of the written scope and put the inspection on the schedule. If a contractor tells you a permit isn’t needed for a drain relocation, that’s a conversation worth leaving.
What’s Behind the Wall? What San Francisco Homes Usually Reveal
This is the part of the quote that surprises people. In the Sunset District, a 1938 stucco row house typically has a tub surround set on gypsum lath over the original studs, and the bottom foot of that wall is often water-damaged from decades of spray. In a Richmond District Edwardian, we regularly find galvanized supply lines to the shower valve that have narrowed to a pencil’s width with mineral scale. In a North Beach walk-up, the drain line might be original cast iron with a pitted interior. None of this shows up in a photo taken from the doorway. That’s why our estimate opens a section of wall, documents what’s behind it, and quotes against the actual condition, not a guess. When a surprise appears mid-project, it goes on a change order, signed before we touch it. That’s the discipline that keeps projects within a few percent of the agreed number across 4,000-plus jobs.
How Does Upfront Pricing Work With Rowan?
Every tub-to-shower conversion we quote comes with a flat written price and a written scope before work starts, plus a written warranty. “Call for a quote” isn’t something we do. Clause 1 of the Haven Standard exists because a price that changes mid-project is a price you didn’t actually agree to. When we hand you the estimate, it names the fixtures (Kohler, Toto, Schluter, and other vetted brands from our sourcing list of 50-plus), the tile, the waterproofing method, the permit, the glass, and the labor. If a surprise shows up behind the wall, you get a written change order with the number on it, and we don’t proceed until you sign. If we do the work and it’s not right, the 365-Day Done Right Promise covers it: we make it right, backed by the Haven Standard, not a handshake. Background-checked, uniformed technicians handle the work, a live person answers calls 24/7, and every visit includes a documented photo record as standard. The whole San Francisco market is covered through our San Francisco service area.
FAQs – Tub-to-Shower Conversion Cost
How much does a tub-to-shower conversion cost in San Francisco?
A tub-to-shower conversion in San Francisco costs $4,130 to $11,800, with most single-bathroom projects landing between $6,000 and $8,500. The number depends on drain relocation, tile choice, and any hidden rot behind the tub surround. Call (844) 797-6388 for an exact written quote, and estimates are free.
Is it cheaper to repair the tub or convert it to a shower?
Repairing a cracked or leaking tub usually runs $350-$900, but it’s a temporary fix if the surround or drain is failing. A tub-to-shower conversion at $4,130-$11,800 replaces the whole wet wall, which is why most San Francisco homeowners choose to convert rather than patch a 20-year-old surround. If the tub itself is sound and only the tile is dated, a shower replacement at $3,540-$10,030 can be the lower-cost option. Call (844) 797-6388 and we’ll tell you which one your bathroom actually needs.
Can you convert a tub to a shower in the same footprint?
Yes. Most tubs occupy a 30-inch-by-60-inch alcove, and the standard shower pan is 30 by 60, so the conversion usually fits the same footprint without moving walls. The variable is the drain: if the tub drain sits at one end, a centered shower drain requires relocation at $900-$2,400. Keeping the drain where it is keeps the project in the $4,130-$5,500 range for a prefab pan and surround. Call (844) 797-6388 to measure your alcove and price it in writing.
Does a tub-to-shower conversion add value in San Francisco?
A well-done shower conversion typically returns a meaningful share of its cost at resale because buyers in San Francisco’s inner neighborhoods tend to prefer a modern shower over a dated tub surround. The return varies by neighborhood, but a $4,130-$11,800 investment in a full waterproofing and tile job holds up better than a cosmetic patch. If you’re evaluating a resale return, bring any written estimate from another contractor and we’ll review it line by line at no charge. Call (844) 797-6388.
Can you do a tub-to-shower conversion in a rental or condo in San Francisco?
Yes, and it’s common in San Francisco’s dense rental stock, but condos and multi-unit buildings may require HOA or building-owner approval before plumbing work starts. A permit from San Francisco DBI is still required for drain relocation and valve changes, typically $400-$1,200. We handle the permit and coordinate the inspection so it doesn’t fall on you. Call (844) 797-6388 for a written scope that includes the permit and HOA coordination.
Why Choose Rowan Construction Group for a Tub-to-Shower Conversion in San Francisco?
Because we hand you the number first. Rowan Construction Group operates across seven residential trades (Kitchen Remodeling, Bathroom Remodeling, Roofing, Windows and Doors, Fence Installation, Driveway and Pavers, and Home Additions including ADUs) under The Haven Standard, with 4,000-plus projects delivered since 2007, every one quoted with a flat written price and a written scope before work started. Our technicians bring up to 19 years of experience to each conversion. A live person answers calls 24/7, every visit includes a documented photo record as a standard deliverable, and a free second opinion on any written estimate is a standing offer. If a competitor’s quote omits the flood test or the permit, bring it. We’ll sit down and read it with you, clause by clause.
Get a Free Tub-to-Shower Conversion Estimate
Call (844) 797-6388 for a free, written tub-to-shower conversion estimate in San Francisco. We’ll open the wall, photograph what’s behind it, and hand you a flat price before anyone picks up a tool. That record, and the 365-Day Done Right Promise behind it, is how we do the work.
Pricing reflects the San Francisco market as of 2026. Rowan Construction Group San Francisco offers free estimates – call (844) 797-6388.
Written by the team at Rowan Construction Group.
What Our Customers Say
"Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O.












