







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Driveway & Pavers for San Francisco Homeowners
San Francisco’s fog belt and clay soils are hard on driveways. In neighborhoods like the Sunset and Noe Valley, we regularly see pavers settle unevenly after a wet winter because the base wasn’t compacted to depth, and concrete slabs on sloped lots near Twin Peaks crack where water pools instead of draining. Our technicians have up to 19 years of experience reading those conditions before a single paver is laid. We quote a flat written price before any work starts, back it with the 365-Day Done Right Promise, and answer calls 24/7. Call (844) 797-6388 to schedule a free estimate.
What Our Driveway & Pavers Service Includes
Paver Driveways
Paver driveways are interlocking clay or concrete units set on a compacted aggregate base and sand bedding. You need one when you want a surface that flexes with minor ground movement instead of cracking the way a poured slab does, which happens often on San Francisco’s sloping lots. We install Belgard and Techo-Bloc pavers over an excavated base, set edge restraints at the perimeter so the field doesn’t creep, and run a polymeric joint sand that holds up to fog-season moisture.

Concrete Driveways & Concrete Work
A concrete driveway is a poured slab, typically reinforced with mesh or rebar and scored into panels for controlled cracking. It makes sense when you want a clean, flat surface at a lower per-square-foot cost than pavers and your grade allows for proper drainage away from the house. We pour with a compacted subbase, control joints cut to depth, and a finish matched to your existing hardscape, then check the slope so runoff moves toward the street, not your foundation.

Asphalt Driveways & Resurfacing
Asphalt is a hot-mix surface over a compacted base that lets water shed quickly and costs less upfront than pavers or concrete. Resurfacing is the right call when the existing asphalt is sound but worn, so a fresh overlay restores a clean look without full removal. We mill or clean the surface, tack-coat it, and lay the new lift at proper thickness, sealing edges and tying into your apron so the transition at the sidewalk stays tight.

Driveway Repair & Replacement
Repair covers localized failures like a cracked panel, a settled paver field, or a heaved edge; replacement means tearing out and rebuilding the base and surface together. You need replacement when the failure runs under the slab or the base itself has given way, since patching over a bad base only buys a season. We open the area, show you the substrate condition in the photo record, and tell you plainly whether a repair will hold or you’re throwing money at a surface that will fail again.
Patios, Walkways & Pool Decks
These are the same paver and concrete skills applied to outdoor living surfaces: patios, garden paths, entry walks, and pool surrounds. You want them redone when joints shift, trip hazards appear at walkway steps, or the pool deck holds water against the house. We set pavers and slabs to the same base standard as a driveway, slope them where they belong, and pick a texture that won’t turn slick in San Francisco’s damp months.
Brick Paver Driveway
Brick pavers are fired clay units that hold color and age with a character concrete can’t match. They suit homeowners restoring a period home where the original surface was brick, or anyone who wants a warm, permeable-looking finish at the front of the property. We lay them over a properly excavated base with edge restraint and correct joint spacing, matching the bond pattern to the house’s era where that matters.
Stamped Concrete Driveway
Stamped concrete is poured concrete pressed with textured mats to mimic stone, brick, or slate while keeping a single continuous surface. It fits when you want a decorative look without the joint lines and upkeep of individual pavers. We pour, stamp, and seal in the same visit where conditions allow, then apply a sealer that stands up to UV exposure and the salt air that dulls finishes near the coast.
Driveway Sealing
Sealing is a protective coat applied to asphalt or concrete to slow water penetration, resist staining, and hold color. It’s worth doing when the surface has gone chalky, water no longer beads, or hairline cracks are starting to open. We clean and prep the surface first, because sealing over dirt or standing moisture traps problems underneath, then apply the coat at the right film thickness for the material.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Work With for Driveway & Pavers
We set a lot of Belgard and Techo-Bloc pavers, and the two behave differently underfoot and under weather. Techo-Bloc’s tighter dimensional tolerances let us hold crisp straight runs and clean curves on a sloped entry, while Belgard’s broader color and texture range gives us room to match a 1920s stucco facade or a modern flat-front in the Mission. Knowing how each line cuts, joints, and holds color after a few wet seasons is the part that keeps a driveway looking right years later.
For retaining walls and edge restraint that frame the driveway, we work with the same systems that pair with those pavers, and when a front entry ties into Hardie-trimmed siding or a new garage door surround, we keep finish and pitch consistent across the whole facade. We don’t stock product or pull from shelves, but we know these lines well enough to spec the right one for your grade and drainage. Whether your driveway calls for Belgard, Techo-Bloc, or any other paver make, we can help.
Signs You Need Driveway & Pavers Right Now
- Water pooling against the garage or house. When the driveway holds water instead of shedding it, that moisture works its way toward the foundation and framing. A slope that’s off by even a small margin is the usual cause, and it’s fixable before it reaches the structure.
- Pavers that rock, settle, or spread at the edges. Movement at the surface usually means the base wasn’t compacted to depth or the edge restraint has failed. Left alone, the field keeps creeping and the joints open up to weeds and water.
- Cracks that run under the slab. A hairline crack is cosmetic; a crack that widens across panels or follows a seam points to a base or drainage failure underneath. That’s when a patch stops helping and the base needs to be rebuilt.
- Trip hazards on walkways and steps. A heaved paver or a settled concrete panel at a front walk or garden path is a fall waiting to happen. Getting the grade and joint height back in line is a smaller job than the injury it prevents.
- Asphalt gone chalky or graying with new cracks. Oxidized, fading asphalt with fine cracking is the signal that it’s time to seal before water gets below the surface. Sealing a sound driveway protects it; sealing a failing one traps the problem.
Our Driveway & Pavers Process – Step by Step
- 1
On-site assessment and photo record. We walk the surface, check the grade and drainage, and note the condition of the base where we can see it. Every visit includes a documented photo record of what we found, so you see the same evidence we do.
- 2
Written flat-price quote with a written scope. You get the number in writing before anyone picks up a tool: what gets removed, what gets built, the materials spec, and the warranty terms. No “call for a quote” and no surprise line items.
- 3
Second opinion on any competing estimate. If you have another contractor’s written quote, we’ll review it line by line at no charge so you can compare scope and materials apples to apples before you decide.
- 4
Permits, base prep, and installation. Where San Francisco requires a permit for the work, we handle it and the inspection. Then we excavate to depth, compact the base in lifts, and set pavers, pour concrete, or lay asphalt to the spec in the written scope.
- 5
Final walkthrough and change-order discipline. We finish with a walkthrough, a written warranty, and the completed photo record. If a change comes up mid-job, nothing proceeds until the change order is signed, which is the discipline that keeps projects within a few percent of the agreed price.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Driveway & Pavers Cost in San Francisco?

Pricing in San Francisco runs higher than most of the Bay Area because access, steep grades, and permit requirements add labor and disposal cost. A typical paver driveway here runs $8,260 – $21,240 depending on square footage, the paver line you choose, and how much base excavation the grade demands. Concrete driveway installation runs $5,310 – $14,160, asphalt paving $4,130 – $10,620, and a full driveway replacement, where the base and surface both come out and get rebuilt, runs $5,900 – $16,520. Smaller line items price separately: paver patio installation $4,130 – $12,980, driveway sealing $295 – $825.
What moves the number most is site condition, not material brand. A flat lot with easy truck access prices lower than a hillside driveway in Diamond Heights where material has to be carried or craned. Drainage corrections, retaining and edge restraint, and haul-away of old concrete or asphalt all factor in. The best way to avoid overpaying is to get a written, line-item scope and compare it against a competing quote, which we’ll do for you at no charge under our Free Second Opinion offer. Every free estimate includes a written flat price, a written scope, and the documented condition we found, so you can see exactly where the money goes.
Driveway & Pavers Near San Francisco – Our Service Area
We work across San Francisco and the surrounding East Bay and Peninsula, including Driveway & Pavers in Emeryville, Driveway & Pavers in Berkeley, Oakland, Alameda, Albany, Piedmont, El Cerrito, Richmond, San Pablo, South San Francisco, and Millbrae. If you’re outside those areas, call and we’ll confirm coverage. We answer calls 24/7 and can usually schedule an assessment within a few days, so the quote isn’t sitting in limbo. Start at our home page to see the full range of trades we cover.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Driveway & Pavers in San Francisco

Driveway and pavers service covers the design, installation, repair, and sealing of the hard surfaces at the front of your home: paver, concrete, and asphalt driveways, plus patios, walkways, pool decks, brick pavers, and stamped concrete. It’s the trade that handles the base, the drainage, and the finish surface together, because a surface only holds up if the base under it is right. We install and repair all of those surfaces and tie them into your existing hardscape and drainage.
A driveway sealing job is typically a day, while a full paver or concrete driveway usually takes several days to a couple of weeks depending on size, base excavation, and permit and inspection timing. Larger rebuilds that include drainage correction or a retaining wall run longer. We put the expected schedule in the written scope before work starts, so you know the timeline going in and not the day the crew shows up.
Paver driveway installation in San Francisco runs $8,260 – $21,240, concrete driveway installation runs $5,310 – $14,160, and asphalt paving runs $4,130 – $10,620. Full driveway replacement, which rebuilds the base and surface, runs $5,900 – $16,520, and paver patios run $4,130 – $12,980. Call (844) 797-6388 for an exact quote with a written scope, and estimates are free.
Yes. We install both Belgard and Techo-Bloc paver lines regularly and know how each one cuts, joints, and holds color through wet seasons, which matters on San Francisco’s sloped, fog-heavy lots. We also work with other paver makers, so if you already have a material in mind, we can spec to it. The written quote names the specific line and spec so there’s no substitution later.
We answer calls 24/7, so you can reach a live person any time to describe the problem, and we schedule assessments quickly. Driveway work is planned construction, not an emergency service, so what we promise is a fast, honest look and a written price, not a same-day install. If water is threatening your garage or foundation, call us and tell us what you’re seeing and we’ll help you get it on the calendar as soon as possible.
Every project is covered by the 365-Day Done Right Promise: if it isn’t done right, we make it right, backed by The Haven Standard and printed on your paperwork rather than buried in an asterisk. You also get a written warranty that spells out exactly what’s covered, plus the documented photo record of what was done. If something looks off within the first year, call and we’ll correct it.
Clear vehicles, bins, and anything stored on the driveway or walkway before we arrive, and let us know about irrigation heads, buried lines, or a gate code. Expect some noise, dust, and a temporary loss of driveway access while the base and surface are being done. Your written scope will note the access plan and where material will stage, so the crew’s arrival doesn’t catch you off guard.
Schedule Your Driveway & Pavers Service in San Francisco Today
Whether your pavers are settling, your concrete is pooling water against the garage, or you’re ready to build a driveway worth pulling up to, we’ll put the number in writing before anyone starts. Call (844) 797-6388 for a free, no-obligation estimate with a written scope and the 365-Day Done Right Promise behind it. Calls are answered by a live person 24/7, and every visit includes a documented photo record.
Written by the team at Rowan Construction Group San Francisco.












