







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in San Francisco, CA
Cabinet refacing in San Francisco typically runs $6,500 to $15,000 for a standard galley or L-shaped kitchen, while full cabinet replacement lands between $14,000 and $38,000 depending on box quality, door style, and whether the layout changes. Refacing keeps your existing cabinet boxes and swaps the doors, drawer fronts, and veneer; replacement tears out and rebuilds the storage footprint. We do both, and we put the number in writing before anyone touches a hinge.
This work sits inside the larger picture of Kitchen Remodeling in San Francisco, and most of the projects we quote here start as a cabinet-only job that homeowners later expand or trim back. Because cabinets drive roughly 40% of a kitchen budget, getting the cabinet decision right first is what keeps the rest of the remodel honest. Call (844) 797-6388 and we’ll walk through which path fits your kitchen before you commit to either.
Cabinets in San Francisco age differently than they do in the suburbs. The marine layer off the Pacific pushes indoor humidity into the 60s and 70s through summer, and in pre-1940 Victorians and Edwardians the cabinet boxes are often original fir that’s been painted over four or five times. We see more sagging shelves and swollen particleboard in the Sunset and Richmond districts than anywhere else we work. That changes what’s worth saving and what gets rebuilt.

Key Takeaways
- Refacing costs roughly 40-55% of full replacement and takes 3-5 days versus 2-3 weeks.
- Original fir and redwood boxes in pre-war San Francisco homes are frequently worth refacing; 1990s particleboard rarely is.
- We source KraftMaid and Wellborn cabinetry and pair them with Cambria quartz when the countertop is part of the job.
- Every quote is a flat written price with a written scope, delivered before work starts.
When You Need Cabinet Installation & Refacing
Cabinet problems show up in specific ways. These are the situations where a refacing or replacement conversation makes sense:
- Doors that no longer close flush. In older San Francisco homes, the box itself has often settled or warped while the doors stayed true. If two or three doors in a run won’t sit flat, the issue is usually the frame, not the hinge, and new doors won’t fix it.
- Painted-over paint. We regularly find five or more coats on original cabinets in Noe Valley and Bernal Heights. At that point the profiles are soft, the seams are filled, and refacing with new doors and a fresh veneer gives you a cleaner result than another coat.
- Water damage near the sink and dishwasher. Swollen toe kicks and soft bottoms in the sink base are common in any home older than 20 years. We check the substrate before quoting refacing, because a soft box can’t hold new hardware.
- A layout that no longer works. If you’re moving the range, adding a peninsula, or opening the wall to the dining room, installation is the answer, not refacing. You’re changing the boxes anyway.
- Outdated door style on a solid box. If the boxes are square, dry, and structurally sound, refacing with a shaker or slab front in a current finish gets you a new kitchen for a fraction of the cost.
- Storage that’s failing function. Deep single shelves, no drawer glides, and cabinets that go dark in the back. New interior fit-out (pull-outs, soft-close slides, adjustable shelving) can ride along with either refacing or replacement.

Our Cabinet Installation & Refacing Process
Here’s how a cabinet job runs with us, from first call to signed-off punch list.
- On-site assessment and substrate check. We open every cabinet, check the box for square, look for water damage or pest history, and photograph the interior condition. In San Francisco that means looking at the wall behind the cabinets too, since old plaster and knob-and-tube wiring often surface once the boxes come out. You get the photo record of what we found, not just a verbal description.
- Written scope and flat price. Under Clause 1 of the Haven Standard, the price is written before anyone starts. You receive a flat quote with a written scope that names the door style, the box construction, the hardware, and the warranty. If you’re weighing refacing against replacement, both numbers appear on the same page so you can compare them directly.
- Material selection. We work with KraftMaid and Wellborn for cabinetry, and where the countertop is part of the scope we quote Cambria quartz alongside. Door samples come to your kitchen so you can see the finish under your actual light, which matters in north-facing San Francisco kitchens that rarely see direct sun.
- Removal or prep. For replacement, we pull the old boxes, repair the wall, and check for anything behind them that needs attention before new cabinets go in. For refacing, we remove doors and drawer fronts, sand and repair the box faces, and apply the new veneer and edge banding.
- Installation. Boxes are leveled and shimmed, screwed to studs, and checked for plumb at every run. Doors and drawers are hung, aligned, and adjusted so gaps are even. Any change to the agreed scope requires a signed change order before work continues, which is the discipline that keeps projects within a few percent of the agreed cost.
- Final walkthrough and documentation. We walk the kitchen with you, adjust anything that isn’t right, and leave you with the documented photo record of the install. The 365-Day Done Right Promise covers the work for a full year: if something isn’t right, we make it right.
If the cabinet job is part of a larger home project, we sequence it so cabinet installation doesn’t collide with flooring, electrical, or countertop templating. That coordination is the difference between a three-week kitchen and a six-week one.
Cabinet Installation & Refacing Pricing in San Francisco
Cabinet pricing in San Francisco runs higher than national averages, mostly because labor rates here are among the highest in the country and because older homes rarely have square walls behind the cabinets. Below are the ranges we quote most often. Every one of these comes with a flat written price before work starts.
| Scope | Typical range | Timeline |
|---|---|---|
| Refacing, standard 10×10 kitchen (doors, veneer, hardware) | $6,500 – $15,000 | 3-5 days |
| Refacing with new interior fit-out (pull-outs, soft-close) | $9,000 – $18,000 | 4-6 days |
| Stock cabinet replacement, same layout | $14,000 – $24,000 | 2-3 weeks |
| Semi-custom replacement (KraftMaid, Wellborn), same layout | $22,000 – $38,000 | 3-4 weeks |
| Layout change (moving sink, range, or adding an island) | $28,000 – $55,000+ | 4-6 weeks |
| Cabinet-only, no countertop or backsplash | Deduct 20-30% from above | Varies |
What moves the number:
- Box condition. Soft or water-damaged boxes push a refacing job toward replacement. We check this before quoting, not after.
- Wall and floor condition. Plaster walls out of plumb, uneven floors, and hidden electrical in pre-war homes add framing and repair time.
- Door style and finish. A painted shaker is the value end; a stained inset door with a custom finish is the top end. The gap between them is often $8,000 to $12,000 on a full kitchen.
- Hardware and interior fit-out. Soft-close slides, pull-out pantries, and custom dividers are line items, not surprises. They usually add $2,000 to $5,000.
- Countertop coordination. If the countertop is part of the job, templating has to happen after cabinets are set. We schedule that so nothing gets re-cut.
We offer a free second opinion on any written estimate. If you have a competitor’s quote and want it reviewed line by line before you sign, bring it. The review costs nothing and we don’t require you to hire us to get it.
FAQs – Cabinet Installation & Refacing
Is it cheaper to reface or replace cabinets in San Francisco?
Refacing is almost always cheaper, usually 40-55% less than replacement, as long as the boxes are structurally sound. In a 10×10 kitchen with solid boxes, refacing runs $6,500 to $15,000 versus $14,000 to $24,000 for replacement. Refacing stops being a good deal when the boxes are soft, warped, or have water damage, because the new doors won’t sit right on a failing frame. Call (844) 797-6388 for a free assessment and we’ll tell you which category your cabinets fall into.
How long does a cabinet installation or refacing job take in San Francisco?
Refacing takes 3-5 days on a standard kitchen; full replacement takes 2-3 weeks, and layout changes take 4-6 weeks. The timeline stretches with older San Francisco homes because we often find plaster repairs or old wiring behind the cabinets that needs addressing before new boxes go in. We give you a written timeline with the written price, so you know both before you commit.
Do I need a permit for cabinet work in San Francisco?
Straight like-for-like cabinet replacement typically does not require a permit, but moving plumbing, electrical, or gas lines to change the layout does. In San Francisco, a layout change that touches the sink or range almost always triggers at least a plumbing or electrical permit through the Department of Building Inspection. Because of that, we flag permit needs in the written scope before work starts. Call (844) 797-6388 for a free estimate and we’ll tell you what your specific project needs.
What’s the difference between refacing and resurfacing cabinets?
Refacing replaces the doors, drawer fronts, and the visible veneer on the box faces, which means the front of your kitchen is genuinely new. Resurfacing (sometimes called refinishing) keeps the existing doors and applies a new finish or laminate over them. Refacing gives you a longer warranty and a wider range of styles, including new door profiles from KraftMaid and Wellborn. Resurfacing is cheaper but limited by the shape and condition of the doors you already have. For a free written quote on either, call (844) 797-6388.
How much does it cost to install cabinets in San Francisco?
Cabinet installation in San Francisco typically runs $14,000 to $38,000 for a standard kitchen, depending on whether you use stock or semi-custom boxes and whether the layout changes. Labor on cabinet installation alone (no materials) usually runs $3,500 to $9,000 on a standard kitchen. The higher end reflects older homes with out-of-plumb walls, uneven floors, and hidden electrical behind the cabinets. Our technicians have up to 19 years of experience with exactly these conditions. Call (844) 797-6388 for a free written estimate.
Related Services
- Kitchen Remodeling – the parent service, covering the full scope from layout to lighting.
- Bathroom Remodeling in San Francisco – cabinet and vanity work for the other room in the house.
- Roofing in San Francisco – worth checking before any major interior remodel.
- Windows and Doors in San Francisco – often bundled with kitchen work.
- Fence Installation in San Francisco – exterior work often sequenced with interior jobs.
- Driveway and Pavers in San Francisco
- Home Additions including ADUs in San Francisco – cabinet work often follows.
- Kitchen Remodeling in Oakland
- Kitchen Remodeling in San Jose
- Kitchen Remodeling in Daly City
- Kitchen Remodeling in Berkeley
- Kitchen Remodeling in Marin County
Get Your Cabinet Project Priced in Writing
Every Rowan Construction Group San Francisco cabinet job comes with a flat written price, a written scope, a written warranty, and a documented photo record when the crew leaves. Crews are background-checked and uniformed, and a live person answers the phone around the clock. If you have a competitor’s written estimate and want a free second opinion before you commit, we’ll review it line by line at no charge. Call (844) 797-6388 for a free estimate on cabinet installation or refacing in San Francisco.
Written by the team at Rowan Construction Group San Francisco, serving San Francisco.


